Test Db2 Access ошибка

[Kron]

После установки DB2Access, подключение прошло нормально, но при запуске TEST DB2 Access выдает ошибку в конце "DB2 Access admin returned error" Как с энтим бороться, и кто как решал проблему. Прикрепил скрин окна, все ставили по умолчанию.

 

[puks]

Problem

In Lotus® Domino®, you remove your DB2 Access Server. You cannot re-enable it and you receive the following error message when trying to test access (Notes Administration -> Configuration panel -> Tools -> DB2 Server) :

"DB2 Access admin returned error"

The Edit DB2 Access Connection button is also inaccessible (grayed out).

The following error appears in the console log;

"'DB2 ACCESS SET' failed. DB2 Access could not access server."
Cause
This situation occurs because the DB2 Access Remove process could not remove the User Defined Function (UDF) information.

Resolving the problem
This issue was reported to Quality Engineering as SPR# KLME6YESP2.

You can work around this issue by removing the UDF info from the DB2 Control Center, as follows:

1. In the Domino Administrator client , issue the command (without quotes): "Remove DB2 Access"

2. Stop the Domino Server.

3. Make sure the DB2 Access information is removed from the Server Document and the notes.ini file.

4. Connect to the DB2 database from the DB2 Control Center:

a. Go to Application Objects --> User Defined Functions.
b. Sort the Schema column to see the functions with the Domino schema.
c. Drop these functions one at a time until they are all gone:

NOTE: Some functions that may need to be dropped are:

DeleteNOTE
DeleteNote2
GetudfTXNID
INSERTNOTE2
ISREADER3
UDFADMIN
UDFLOADTEST
UPDATENOTE2

5. Re-enable the DB2 Access Server in Domino Administration.

 

[Kron]

Сделал скрин в окне, я в шоке от него, все вроде провел как написано...

 

[ZhAN]

Сделал скрин в окне, я в шоке от него, все вроде провел как написано...

пользователь есть в АК на сервере например DB2Admin и он же в группе db2Admin в винде?