не получается запустить скрипт на python (

[mi4]

Здрасти )
Пробую написать:

#! usr/bin/env python

import subprocess

subprocess.call("ifconfig ", shell=True)

interface = input("interface -->")
new_mac = input("new MAC address -->")

print("[+] Changing MAC address for " + interface + " to " + new_mac)

subprocess.call("ifconfig " + interface + " down", shell=True)
subprocess.call("ifconfig " + interface + " hw ether" + new_mac, shell=True)
subprocess.call("ifconfig " + interface + " up", shell=True)

в ответ получаю ошибку:

/root/PycharmProjects/mac_change/venv/bin/python /root/PycharmProjects/mac_change/mac_ch.py
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.0.2.7  netmask 255.255.255.0  broadcast 10.0.2.255
        ether 00:11:22:33:22:11  txqueuelen 1000  (Ethernet)
        RX packets 2258  bytes 2446173 (2.3 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 2109  bytes 205428 (200.6 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 30  bytes 2614 (2.5 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 30  bytes 2614 (2.5 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

interface -->eth0
new MAC address -->00:11:22:33:11:11
[+] Changing MAC address for eth0 to 00:11:22:33:11:11
Usage:
  ifconfig [-a] [-v] [-s] <interface> [[<AF>] <address>]
  [add <address>[/<prefixlen>]]
  [del <address>[/<prefixlen>]]
  [[-]broadcast [<address>]]  [[-]pointopoint [<address>]]
  [netmask <address>]  [dstaddr <address>]  [tunnel <address>]
  [outfill <NN>] [keepalive <NN>]
  [hw <HW> <address>]  [mtu <NN>]
  [[-]trailers]  [[-]arp]  [[-]allmulti]
  [multicast]  [[-]promisc]
  [mem_start <NN>]  [io_addr <NN>]  [irq <NN>]  [media <type>]
  [txqueuelen <NN>]
  [[-]dynamic]
  [up|down] ...

  <HW>=Hardware Type.
  List of possible hardware types:
    loop (Local Loopback) slip (Serial Line IP) cslip (VJ Serial Line IP)
    slip6 (6-bit Serial Line IP) cslip6 (VJ 6-bit Serial Line IP) adaptive (Adaptive Serial Line IP)
    ash (Ash) ether (Ethernet) ax25 (AMPR AX.25)
    netrom (AMPR NET/ROM) rose (AMPR ROSE) tunnel (IPIP Tunnel)
    ppp (Point-to-Point Protocol) hdlc ((Cisco)-HDLC) lapb (LAPB)
    arcnet (ARCnet) dlci (Frame Relay DLCI) frad (Frame Relay Access Device)
    sit (IPv6-in-IPv4) fddi (Fiber Distributed Data Interface) hippi (HIPPI)
    irda (IrLAP) ec (Econet) x25 (generic X.25)
    eui64 (Generic EUI-64)
  <AF>=Address family. Default: inet
  List of possible address families:
    unix (UNIX Domain) inet (DARPA Internet) inet6 (IPv6)
    ax25 (AMPR AX.25) netrom (AMPR NET/ROM) rose (AMPR ROSE)
    ipx (Novell IPX) ddp (Appletalk DDP) ec (Econet)
    ash (Ash) x25 (CCITT X.25)

Process finished with exit code 0

подскажите что не правильно делаю ?

пробую:

subprocess.call(["ifconfig", interface, "down"])
subprocess.call(["ifconfig", interface, "hw", "ether", new_mac])
subprocess.call(['ifconfig', interface, "up"])

обратно прилетает:

SIOCSIFHWADDR: Cannot assign requested address

 

[mi4]

попробовал 58:46:75:49:00:b8 в качестве мака все взлетело )

 

[f22]

Пробую написать:

Свой велосипед, конечно, писать интересно и полезно, но уже есть macchanger

ifconfig wlan1mon down
macchanger -r wlan1mon
ifconfig wlan1mon up

 

[YMainErr]

hw ether" + new_mac

Вот тут пробела не хватает