B правой части каждого сообщения есть стрелки ⇧ и ⇩. Не стесняйтесь оценивать ответы. Чтобы автору вопроса закрыть свой тикет, надо выбрать лучший ответ. Просто нажмите значок ✔ в правой части сообщения.
Познакомьтесь с пентестом веб-приложений на практике в нашем новом бесплатном курсе
lsusb сюда, а так с воздуха можно предположить что возможно поможет установка sudo apt install rtl8812au-dkms
Спасибо , что откликнулся . Вот вывод команды:
Спасибо , что откликнулся , вот вывод команд :
Смотри эта команда ничего не дала lspci -nnk | grep 0280 -A2 поэтому я ввел просто lspci
lspci
00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
00:01.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:02.0 VGA compatible controller: VMware SVGA II Adapter
00:03.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
00:04.0 System peripheral: InnoTek Systemberatung GmbH VirtualBox Guest Service
00:05.0 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 01)
00:06.0 USB controller: Apple Inc. KeyLargo/Intrepid USB
00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08)
00:08.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
00:09.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
00:0b.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller
00:0d.0 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 02)dmesg
[ 0.000000] Linux version 4.19.0-kali5-amd64 (devel@kali.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.37-5kali1 (2019-06-20)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-kali5-amd64 root=UUID=3d91892d-0068-40b7-b8f3-2e6324a8b75c ro initrd=/install/initrd.gz quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 5a9e0001, primary cpu clock
[ 0.000000] kvm-clock: using sched offset of 10346495116 cycles
[ 0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000003] tsc: Detected 3600.004 MHz processor
[ 0.003543] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.003546] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.003550] last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
[ 0.003582] MTRR default type: uncachable
[ 0.003582] MTRR variable ranges disabled:
[ 0.003583] Disabled
[ 0.003584] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[ 0.003591] CPU MTRRs all blank - virtualized system.
[ 0.003598] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.003637] found SMP MP-table at [mem 0x0009fff0-0x0009ffff]
[ 0.340777] Base memory trampoline at [(____ptrval____)] 99000 size 24576
[ 0.340834] BRK [0x5ac01000, 0x5ac01fff] PGTABLE
[ 0.340836] BRK [0x5ac02000, 0x5ac02fff] PGTABLE
[ 0.340836] BRK [0x5ac03000, 0x5ac03fff] PGTABLE
[ 0.340873] BRK [0x5ac04000, 0x5ac04fff] PGTABLE
[ 0.340875] BRK [0x5ac05000, 0x5ac05fff] PGTABLE
[ 0.341032] BRK [0x5ac06000, 0x5ac06fff] PGTABLE
[ 0.341065] RAMDISK: [mem 0x32ff1000-0x357effff]
[ 0.341081] ACPI: Early table checksum verification disabled
[ 0.341093] ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX )
[ 0.341096] ACPI: XSDT 0x000000007FFF0030 00003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
[ 0.341100] ACPI: FACP 0x000000007FFF00F0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
[ 0.341105] ACPI: DSDT 0x000000007FFF0470 0022EA (v02 VBOX VBOXBIOS 00000002 INTL 20100528)
[ 0.341107] ACPI: FACS 0x000000007FFF0200 000040
[ 0.341110] ACPI: FACS 0x000000007FFF0200 000040
[ 0.341112] ACPI: APIC 0x000000007FFF0240 00005C (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
[ 0.341115] ACPI: SSDT 0x000000007FFF02A0 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
[ 0.341121] ACPI: Local APIC address 0xfee00000
[ 0.341800] No NUMA configuration found
[ 0.341801] Faking a node at [mem 0x0000000000000000-0x000000007ffeffff]
[ 0.341804] NODE_DATA(0) allocated [mem 0x7ffeb000-0x7ffeffff]
[ 0.344662] Zone ranges:
[ 0.344663] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.344664] DMA32 [mem 0x0000000001000000-0x000000007ffeffff]
[ 0.344666] Normal empty
[ 0.344667] Device empty
[ 0.344668] Movable zone start for each node
[ 0.344668] Early memory node ranges
[ 0.344669] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.344670] node 0: [mem 0x0000000000100000-0x000000007ffeffff]
[ 0.347597] Reserved but unavailable: 98 pages
[ 0.347598] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffeffff]
[ 0.347599] On node 0 totalpages: 524174
[ 0.347600] DMA zone: 64 pages used for memmap
[ 0.347601] DMA zone: 21 pages reserved
[ 0.347602] DMA zone: 3998 pages, LIFO batch:0
[ 0.347670] DMA32 zone: 8128 pages used for memmap
[ 0.347670] DMA32 zone: 520176 pages, LIFO batch:63
[ 0.361518] ACPI: PM-Timer IO Port: 0x4008
[ 0.361520] ACPI: Local APIC address 0xfee00000
[ 0.361622] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.361624] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.361625] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.361626] ACPI: IRQ0 used by override.
[ 0.361627] ACPI: IRQ9 used by override.
[ 0.361629] Using ACPI (MADT) for SMP configuration information
[ 0.361638] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.361670] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.361671] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.361672] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.361673] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.361674] [mem 0x80000000-0xfebfffff] available for PCI devices
[ 0.361675] Booting paravirtualized kernel on KVM
[ 0.361677] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.566501] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0
[ 0.566506] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.569540] percpu: Embedded 44 pages/cpu s143256 r8192 d28776 u1048576
[ 0.569543] pcpu-alloc: s143256 r8192 d28776 u1048576 alloc=1*2097152
[ 0.569544] pcpu-alloc: [0] 0 1
[ 0.569578] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[ 0.569585] Built 1 zonelists, mobility grouping on. Total pages: 515961
[ 0.569586] Policy zone: DMA32
[ 0.569587] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-kali5-amd64 root=UUID=3d91892d-0068-40b7-b8f3-2e6324a8b75c ro initrd=/install/initrd.gz quiet
[ 0.569684] Calgary: detecting Calgary via BIOS EBDA area
[ 0.569685] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.575113] Memory: 1997696K/2096696K available (10252K kernel code, 1242K rwdata, 3184K rodata, 1580K init, 2296K bss, 99000K reserved, 0K cma-reserved)
[ 0.578689] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.578698] Kernel/User page tables isolation: enabled
[ 0.578760] ftrace: allocating 31825 entries in 125 pages
[ 0.602667] rcu: Hierarchical RCU implementation.
[ 0.602668] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.602669] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.605346] NR_IRQS: 33024, nr_irqs: 440, preallocated irqs: 16
[ 0.630172] Console: colour VGA+ 80x25
[ 0.630176] console [tty0] enabled
[ 0.630190] ACPI: Core revision 20180810
[ 0.630385] APIC: Switch to symmetric I/O mode setup
[ 0.631128] x2apic enabled
[ 0.631786] Switched APIC routing to physical x2apic.
[ 0.634748] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.634803] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e456ed7d0, max_idle_ns: 440795322762 ns
[ 0.634813] Calibrating delay loop (skipped) preset value.. 7200.00 BogoMIPS (lpj=14400016)
[ 0.634815] pid_max: default: 32768 minimum: 301
[ 0.634837] Security Framework initialized
[ 0.634838] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.634850] AppArmor: AppArmor initialized
[ 0.642893] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.646371] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.646381] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.646384] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.646805] mce: CPU supports 0 MCE banks
[ 0.646805] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.646805] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.646805] Spectre V2 : Mitigation: Full generic retpoline
[ 0.646805] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.646805] Speculative Store Bypass: Vulnerable
[ 0.646805] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.646805] Freeing SMP alternatives memory: 24K
[ 0.650805] smpboot: CPU0: Intel(R) Core(TM) i7-7700 CPU @ 3.60GHz (family: 0x6, model: 0x9e, stepping: 0x9)
[ 0.650805] Performance Events: unsupported p6 CPU model 158 no PMU driver, software events only.
[ 0.650805] rcu: Hierarchical SRCU implementation.
[ 0.650805] random: crng done (trusting CPU's manufacturer)
[ 0.650805] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.650805] smp: Bringing up secondary CPUs ...
[ 0.650805] x86: Booting SMP configuration:
[ 0.650805] .... node #0, CPUs: #1
[ 0.033126] kvm-clock: cpu 1, msr 5a9e0041, secondary cpu clock
[ 0.033126] mce: CPU supports 0 MCE banks
[ 0.650831] smp: Brought up 1 node, 2 CPUs
[ 0.650836] smpboot: Max logical packages: 1
[ 0.650837] smpboot: Total of 2 processors activated (14400.01 BogoMIPS)
[ 0.650952] devtmpfs: initialized
[ 0.650952] x86/mm: Memory block size: 128MB
[ 0.651047] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.651047] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.651047] pinctrl core: initialized pinctrl subsystem
[ 0.651075] NET: Registered protocol family 16
[ 0.651175] audit: initializing netlink subsys (disabled)
[ 0.651194] audit: type=2000 audit(1563895289.095:1): state=initialized audit_enabled=0 res=1
[ 0.651194] cpuidle: using governor ladder
[ 0.651194] cpuidle: using governor menu
[ 0.651194] ACPI: bus type PCI registered
[ 0.651194] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.651194] PCI: Using configuration type 1 for base access
[ 0.651405] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.654933] ACPI: Added _OSI(Module Device)
[ 0.654934] ACPI: Added _OSI(Processor Device)
[ 0.654934] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.654935] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.654936] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.654936] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.659164] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.661324] ACPI: Interpreter enabled
[ 0.661331] ACPI: (supports S0 S5)
[ 0.661332] ACPI: Using IOAPIC for interrupt routing
[ 0.661500] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.661746] ACPI: Enabled 2 GPEs in block 00 to 07
[ 0.667318] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.667320] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.667659] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.667664] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.668321] PCI host bridge to bus 0000:00
[ 0.668323] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.668324] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.668325] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.668325] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfdffffff window]
[ 0.668326] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.668457] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.670314] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.672773] pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
[ 0.674201] pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f]
[ 0.674745] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.674745] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.674746] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.674747] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.675416] pci 0000:00:02.0: [15ad:0405] type 00 class 0x030000
[ 0.678807] pci 0000:00:02.0: reg 0x10: [io 0xd010-0xd01f]
[ 0.682807] pci 0000:00:02.0: reg 0x14: [mem 0xf0000000-0xf7ffffff]
[ 0.685721] pci 0000:00:02.0: reg 0x18: [mem 0xf8000000-0xf81fffff]
[ 0.698430] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 0.699003] pci 0000:00:03.0: reg 0x10: [mem 0xf8200000-0xf821ffff]
[ 0.701636] pci 0000:00:03.0: reg 0x18: [io 0xd020-0xd027]
[ 0.708026] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
[ 0.709292] pci 0000:00:04.0: reg 0x10: [io 0xd040-0xd05f]
[ 0.710271] pci 0000:00:04.0: reg 0x14: [mem 0xf8400000-0xf87fffff]
[ 0.711035] pci 0000:00:04.0: reg 0x18: [mem 0xf8800000-0xf8803fff pref]
[ 0.715295] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
[ 0.715853] pci 0000:00:05.0: reg 0x10: [io 0xd100-0xd1ff]
[ 0.716101] pci 0000:00:05.0: reg 0x14: [io 0xd200-0xd23f]
[ 0.717983] pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
[ 0.719003] pci 0000:00:06.0: reg 0x10: [mem 0xf8804000-0xf8804fff]
[ 0.726877] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
[ 0.728799] pci 0000:00:07.0: quirk: [io 0x4000-0x403f] claimed by PIIX4 ACPI
[ 0.728832] pci 0000:00:07.0: quirk: [io 0x4100-0x410f] claimed by PIIX4 SMB
[ 0.729738] pci 0000:00:08.0: [8086:100e] type 00 class 0x020000
[ 0.731027] pci 0000:00:08.0: reg 0x10: [mem 0xf8820000-0xf883ffff]
[ 0.733416] pci 0000:00:08.0: reg 0x18: [io 0xd240-0xd247]
[ 0.740126] pci 0000:00:09.0: [8086:100e] type 00 class 0x020000
[ 0.741446] pci 0000:00:09.0: reg 0x10: [mem 0xf8840000-0xf885ffff]
[ 0.743005] pci 0000:00:09.0: reg 0x18: [io 0xd248-0xd24f]
[ 0.749791] pci 0000:00:0b.0: [8086:265c] type 00 class 0x0c0320
[ 0.750997] pci 0000:00:0b.0: reg 0x10: [mem 0xf8860000-0xf8860fff]
[ 0.759740] pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
[ 0.761058] pci 0000:00:0d.0: reg 0x10: [io 0xd250-0xd257]
[ 0.762315] pci 0000:00:0d.0: reg 0x14: [io 0xd258-0xd25b]
[ 0.763005] pci 0000:00:0d.0: reg 0x18: [io 0xd260-0xd267]
[ 0.763987] pci 0000:00:0d.0: reg 0x1c: [io 0xd268-0xd26b]
[ 0.764885] pci 0000:00:0d.0: reg 0x20: [io 0xd270-0xd27f]
[ 0.765746] pci 0000:00:0d.0: reg 0x24: [mem 0xf8862000-0xf8863fff]
[ 0.769840] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
[ 0.770149] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 *10 11)
[ 0.770316] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *9 10 11)
[ 0.770481] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 10 *11)
[ 0.770857] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.770858] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.770860] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.770861] vgaarb: loaded
[ 0.770901] pps_core: LinuxPPS API ver. 1 registered
[ 0.770902] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.770903] PTP clock support registered
[ 0.770907] EDAC MC: Ver: 3.0.0
[ 0.771839] PCI: Using ACPI for IRQ routing
[ 0.771839] PCI: pci_cache_line_size set to 64 bytes
[ 0.771839] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.771839] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
[ 0.771839] clocksource: Switched to clocksource kvm-clock
[ 0.791295] VFS: Disk quotas dquot_6.6.0
[ 0.791311] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.791398] AppArmor: AppArmor Filesystem Enabled
[ 0.791420] pnp: PnP ACPI init
[ 0.791484] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.791580] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 0.792780] pnp: PnP ACPI: found 2 devices
[ 0.811193] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.811201] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.811202] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.811203] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.811204] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfdffffff window]
[ 0.811240] NET: Registered protocol family 2
[ 0.811329] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
[ 0.811334] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.811352] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.811366] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.811380] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.811384] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.811406] NET: Registered protocol family 1
[ 0.811409] NET: Registered protocol family 44
[ 0.811452] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.811487] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.811651] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.814452] PCI: CLS 0 bytes, default 64
[ 0.814474] Unpacking initramfs...
[ 1.521611] Freeing initrd memory: 40956K
[ 1.521722] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e456ed7d0, max_idle_ns: 440795322762 ns
[ 1.521751] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 1.522246] Initialise system trusted keyrings
[ 1.522254] Key type blacklist registered
[ 1.522483] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[ 1.527678] zbud: loaded
[ 1.527865] pstore: using deflate compression
[ 1.760215] Key type asymmetric registered
[ 1.760216] Asymmetric key parser 'x509' registered
[ 1.760226] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.760327] io scheduler noop registered
[ 1.760328] io scheduler deadline registered
[ 1.760355] io scheduler cfq registered (default)
[ 1.760356] io scheduler mq-deadline registered
[ 1.760515] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.760522] intel_idle: Please enable MWAIT in BIOS SETUP
[ 1.760721] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.761580] Linux agpgart interface v0.103
[ 1.761693] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.761693] AMD IOMMUv2 functionality not available on this system
[ 1.761939] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.762937] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.762971] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.763264] mousedev: PS/2 mouse device common for all mice
[ 1.764428] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.764762] rtc_cmos rtc_cmos: registered as rtc0
[ 1.764774] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 1.764896] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.765082] NET: Registered protocol family 10
[ 1.771011] Segment Routing with IPv6
[ 1.771024] mip6: Mobile IPv6
[ 1.771025] NET: Registered protocol family 17
[ 1.771154] mpls_gso: MPLS GSO support
[ 1.771328] sched_clock: Marking stable (1742178821, 29126480)->(1882796699, -111491398)
[ 1.776389] registered taskstats version 1
[ 1.776390] Loading compiled-in X.509 certificates
[ 1.796654] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.796664] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 1.796677] zswap: loaded using pool lzo/zbud
[ 1.797118] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.797432] rtc_cmos rtc_cmos: setting system clock to 2019-07-23 15:21:17 UTC (1563895277)
[ 1.798540] Freeing unused kernel image memory: 1580K
[ 1.814961] Write protecting the kernel read-only data: 16384k
[ 1.815583] Freeing unused kernel image memory: 2028K
[ 1.815790] Freeing unused kernel image memory: 912K
[ 1.822849] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.822850] x86/mm: Checking user space page tables
[ 1.829810] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.829812] Run /init as init process
[ 1.953858] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.953858] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.955804] SCSI subsystem initialized
[ 1.960460] libata version 3.00 loaded.
[ 1.961728] ata_piix 0000:00:01.1: version 2.13
[ 1.962476] piix4_smbus 0000:00:07.0: SMBus Host Controller at 0x4100, revision 0
[ 1.964138] ahci 0000:00:0d.0: version 3.0
[ 1.964871] ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
[ 1.965238] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 1.965239] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
[ 1.966464] scsi host0: ata_piix
[ 1.966590] scsi host2: ata_piix
[ 1.966617] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 1.966617] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 1.966700] scsi host1: ahci
[ 1.966750] ata3: SATA max UDMA/133 abar m8192@0xf8862000 port 0xf8862100 irq 21
[ 1.971948] cryptd: max_cpu_qlen set to 1000
[ 1.982345] ACPI: bus type USB registered
[ 1.982359] usbcore: registered new interface driver usbfs
[ 1.982364] usbcore: registered new interface driver hub
[ 1.982381] usbcore: registered new device driver usb
[ 1.984440] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.984999] AVX2 version of gcm_enc/dec engaged.
[ 1.984999] AES CTR mode by8 optimization enabled
[ 1.985980] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.985984] ehci-pci: EHCI PCI platform driver
[ 1.986984] ehci-pci 0000:00:0b.0: EHCI Host Controller
[ 1.986988] ehci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 1.987504] ehci-pci 0000:00:0b.0: irq 19, io mem 0xf8860000
[ 2.003008] ehci-pci 0000:00:0b.0: USB 2.0 started, EHCI 1.00
[ 2.003067] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 2.003068] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.003069] usb usb1: Product: EHCI Host Controller
[ 2.003070] usb usb1: Manufacturer: Linux 4.19.0-kali5-amd64 ehci_hcd
[ 2.003070] usb usb1: SerialNumber: 0000:00:0b.0
[ 2.003170] hub 1-0:1.0: USB hub found
[ 2.003174] hub 1-0:1.0: 12 ports detected
[ 2.005972] ohci-pci: OHCI PCI platform driver
[ 2.006808] ohci-pci 0000:00:06.0: OHCI PCI host controller
[ 2.006811] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 2
[ 2.007015] ohci-pci 0000:00:06.0: irq 22, io mem 0xf8804000
[ 2.019941] alg: No test for pcbc(aes) (pcbc-aes-aesni)
[ 2.067845] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 2.067847] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.067848] usb usb2: Product: OHCI PCI host controller
[ 2.067848] usb usb2: Manufacturer: Linux 4.19.0-kali5-amd64 ohci_hcd
[ 2.067849] usb usb2: SerialNumber: 0000:00:06.0
[ 2.067991] hub 2-0:1.0: USB hub found
[ 2.068055] hub 2-0:1.0: 12 ports detected
[ 2.127614] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 2.129322] scsi 2:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 2.191025] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[ 2.280106] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.280262] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 2.280263] ata3.00: 167772160 sectors, multi 128: LBA48 NCQ (depth 32)
[ 2.280466] ata3.00: configured for UDMA/133
[ 2.280543] scsi 1:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 2.427796] sr 2:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
[ 2.427798] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.428032] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.428216] sd 1:0:0:0: [sda] 167772160 512-byte logical blocks: (85.9 GB/80.0 GiB)
[ 2.428219] sd 1:0:0:0: [sda] Write Protect is off
[ 2.428220] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.428223] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.453716] sda: sda1 sda2 < sda5 >
[ 2.453872] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.524629] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:89:03:db
[ 2.524633] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.527345] usb 2-1: new full-speed USB device number 2 using ohci-pci
[ 2.863088] usb 2-1: New USB device found, idVendor=80ee, idProduct=0021, bcdDevice= 1.00
[ 2.863089] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.863090] usb 2-1: Product: USB Tablet
[ 2.863091] usb 2-1: Manufacturer: VirtualBox
[ 2.870848] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.884761] usbcore: registered new interface driver usbhid
[ 2.884761] usbhid: USB HID core driver
[ 2.885740] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/0003:80EE:0021.0001/input/input3
[ 2.885835] hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
[ 3.080509] e1000 0000:00:08.0 eth1: (PCI:33MHz:32-bit) 08:00:27:2c:a5:d6
[ 3.080511] e1000 0000:00:08.0 eth1: Intel(R) PRO/1000 Network Connection
[ 3.643679] e1000 0000:00:09.0 eth2: (PCI:33MHz:32-bit) 08:00:27:3b:02:d8
[ 3.643681] e1000 0000:00:09.0 eth2: Intel(R) PRO/1000 Network Connection
[ 3.689636] PM: Image not found (code -22)
[ 5.283363] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.533283] systemd[1]: Inserted module 'autofs4'
[ 6.630709] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 6.630848] systemd[1]: Detected virtualization oracle.
[ 6.630854] systemd[1]: Detected architecture x86-64.
[ 6.657173] systemd[1]: Set hostname to <kali>.
[ 7.841739] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.845103] systemd[1]: Created slice User and Session Slice.
[ 7.845140] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.845214] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.845222] systemd[1]: Reached target Slices.
[ 7.845279] systemd[1]: Listening on udev Control Socket.
[ 8.015962] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.220622] systemd-journald[265]: Received request to flush runtime journal from PID 1
[ 9.032699] ACPI: AC Adapter [AC] (on-line)
[ 9.176077] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 9.176088] ACPI: Power Button [PWRF]
[ 9.176234] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input5
[ 9.176239] ACPI: Sleep Button [SLPF]
[ 9.389659] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.389706] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6
[ 9.450206] vboxguest: loading out-of-tree module taints kernel.
[ 9.474330] vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
[ 9.478724] input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input7
[ 9.484546] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 9.484655] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 9.485725] vboxguest: misc device minor 58, IRQ 20, I/O port d040, MMIO at 00000000f8400000 (size 0x400000)
[ 9.485726] vboxguest: Successfully loaded version 6.0.6_Debian (interface 0x00010004)
[ 9.497278] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 9.528816] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 10737418240 ms ovfl timer
[ 9.528816] RAPL PMU: hw unit of domain pp0-core 2^-0 Joules
[ 9.528817] RAPL PMU: hw unit of domain package 2^-0 Joules
[ 9.528817] RAPL PMU: hw unit of domain dram 2^-0 Joules
[ 9.528818] RAPL PMU: hw unit of domain pp1-gpu 2^-0 Joules
[ 9.528818] RAPL PMU: hw unit of domain psys 2^-0 Joules
[ 9.975311] [drm] DMA map mode: Using physical TTM page addresses.
[ 9.975484] [drm] Capabilities:
[ 9.975484] [drm] Cursor.
[ 9.975484] [drm] Cursor bypass 2.
[ 9.975485] [drm] Alpha cursor.
[ 9.975485] [drm] 3D.
[ 9.975485] [drm] Extended Fifo.
[ 9.975485] [drm] Pitchlock.
[ 9.975486] [drm] Irq mask.
[ 9.975486] [drm] GMR.
[ 9.975486] [drm] Traces.
[ 9.975486] [drm] GMR2.
[ 9.975487] [drm] Screen Object 2.
[ 9.975487] [drm] Max GMR ids is 8192
[ 9.975488] [drm] Max number of GMR pages is 1048576
[ 9.975488] [drm] Max dedicated hypervisor surface memory is 393216 kiB
[ 9.975489] [drm] Maximum display memory size is 131072 kiB
[ 9.975489] [drm] VRAM at 0xf0000000 size is 131072 kiB
[ 9.975490] [drm] MMIO at 0xf8000000 size is 2048 kiB
[ 9.975490] [drm] global init.
[ 9.975691] [TTM] Zone kernel: Available graphics memory: 1021598 kiB
[ 9.975692] [TTM] Initializing pool allocator
[ 9.975694] [TTM] Initializing DMA pool allocator
[ 9.976010] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.976011] [drm] No driver support for vblank timestamp query.
[ 9.976294] [drm] Screen Objects Display Unit initialized
[ 9.976354] [drm] width 720
[ 9.976400] [drm] height 400
[ 9.976432] [drm] bpp 32
[ 9.976967] [drm] Fifo max 0x00200000 min 0x00001000 cap 0x00000355
[ 9.976973] [drm] DX: no.
[ 9.976973] [drm] Atomic: yes.
[ 9.976974] [drm] SM4_1: no.
[ 9.976989] [drm:vmw_host_log [vmwgfx]] *ERROR* Failed to send host log message.
[ 9.979965] [drm:vmw_host_log [vmwgfx]] *ERROR* Failed to send host log message.
[ 9.984357] fbcon: svgadrmfb (fb0) is primary device
[ 9.986666] Console: switching to colour frame buffer device 100x37
[ 9.987998] [drm] Initialized vmwgfx 2.15.0 20180704 for 0000:00:02.0 on minor 0
[ 10.132812] Adding 2095100k swap on /dev/sda5. Priority:-2 extents:1 across:2095100k FS
[ 10.232800] snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000
[ 11.983945] vboxsf: g_fHostFeatures=0x8000000f g_fSfFeatures=0x1 g_uSfLastFunction=29
[ 11.984226] vboxsf: Successfully loaded version 6.0.6_Debian
[ 13.193532] 15:21:28.896039 main VBoxService 6.0.6_Debian r129722 (verbosity: 0) linux.amd64 (Apr 16 2019 22:08:12) release log
15:21:28.896042 main Log opened 2019-07-23T15:21:28.896031000Z
[ 13.193602] 15:21:28.896174 main OS Product: Linux
[ 13.193647] 15:21:28.896223 main OS Release: 4.19.0-kali5-amd64
[ 13.193692] 15:21:28.896268 main OS Version: #1 SMP Debian 4.19.37-5kali1 (2019-06-20)
[ 13.198470] 15:21:28.896312 main Executable: /usr/sbin/VBoxService
15:21:28.896313 main Process ID: 491
15:21:28.896313 main Package type: LINUX_64BITS_GENERIC (OSE)
[ 13.203355] 15:21:28.905909 main 6.0.6_Debian r129722 started. Verbose level = 0
[ 13.205900] 15:21:28.908460 main vbglR3GuestCtrlDetectPeekGetCancelSupport: Supported (#1)
[ 13.398889] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.403618] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.406948] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 13.407550] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.409343] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 13.414640] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 13.417928] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 13.419835] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 13.423124] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 13.423249] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 13.426913] e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 13.427491] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 18.654263] fuse init (API version 7.27)
[ 99.276197] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 99.582276] usb 1-1: New USB device found, idVendor=2357, idProduct=010d, bcdDevice= 0.00
[ 99.582278] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 99.582279] usb 1-1: Product: 802.11n NIC
[ 99.582280] usb 1-1: Manufacturer: Realtek
[ 99.582281] usb 1-1: SerialNumber: 123456
root@kali:~#
Обучение наступательной кибербезопасности в игровой форме. Начать игру!