Проблема Kali Linux на виртуальной машине не видит адаптер альфу

Mamai

Green Team
24.04.2019
34
1
BIT
0
1. Usb устройство добавлено в самой VM?(создан соответствующий фильтр или нет)
2. Попробуй в VM выбрать версию USB 1.0
3. вывод lsusb и dmesg сразу после загрузки студию.
Да добавлено порт 1.0

1. Usb устройство добавлено в самой VM?(создан соответствующий фильтр или нет)
2. Попробуй в VM выбрать версию USB 1.0
3. вывод lsusb и dmesg сразу после загрузки студию.
да добавлена версия 1.0 usb
 

Mamai

Green Team
24.04.2019
34
1
BIT
0
Я просил вставить вывод этих(lsmod,dmesg) программ сюда :)
вот что получилось
root@server:~# dmesg
[ 0.000000] Linux version 4.19.0-kali4-amd64 (devel@kali.org) (gcc version 8.3.0 (Debian 8.3.0-2)) #1 SMP Debian 4.19.28-2kali1 (2019-03-18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-kali4-amd64 root=UUID=732880b8-fd60-476c-b94a-466f75962cc3 ro initrd=/install/gtk/initrd.gz quiet
[ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency!
[ 0.000000] random: get_random_u32 called from bsp_init_amd+0x20b/0x2b0 with crng_init=0
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf1effff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf1f0000-0x00000000cf1fffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000001] kvm-clock: cpu 0, msr 26ddd001, primary cpu clock
[ 0.000001] kvm-clock: using sched offset of 1976591843966 cycles
[ 0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000009] tsc: Detected 2295.828 MHz processor
[ 0.005664] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.005678] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.005685] last_pfn = 0xcf1f0 max_arch_pfn = 0x400000000
[ 0.005707] MTRR default type: uncachable
[ 0.005708] MTRR variable ranges disabled:
[ 0.005709] Disabled
[ 0.005710] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[ 0.005714] CPU MTRRs all blank - virtualized system.
[ 0.005718] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.184818] Base memory trampoline at [(____ptrval____)] 99000 size 24576
[ 0.184851] BRK [0x27001000, 0x27001fff] PGTABLE
[ 0.184854] BRK [0x27002000, 0x27002fff] PGTABLE
[ 0.184856] BRK [0x27003000, 0x27003fff] PGTABLE
[ 0.184892] BRK [0x27004000, 0x27004fff] PGTABLE
[ 0.184895] BRK [0x27005000, 0x27005fff] PGTABLE
[ 0.184969] BRK [0x27006000, 0x27006fff] PGTABLE
[ 0.185081] BRK [0x27007000, 0x27007fff] PGTABLE
[ 0.185133] RAMDISK: [mem 0x307b1000-0x343cffff]
[ 0.185149] ACPI: Early table checksum verification disabled
[ 0.185190] ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX )
[ 0.185208] ACPI: XSDT 0x00000000CF1F0030 00003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
[ 0.185218] ACPI: FACP 0x00000000CF1F00F0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
[ 0.185228] ACPI: DSDT 0x00000000CF1F0480 0022EA (v02 VBOX VBOXBIOS 00000002 INTL 20100528)
[ 0.185235] ACPI: FACS 0x00000000CF1F0200 000040
[ 0.185241] ACPI: FACS 0x00000000CF1F0200 000040
[ 0.185246] ACPI: APIC 0x00000000CF1F0240 00006C (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
[ 0.185255] ACPI: SSDT 0x00000000CF1F02B0 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
[ 0.185291] ACPI: Local APIC address 0xfee00000
[ 0.185651] No NUMA configuration found
[ 0.185652] Faking a node at [mem 0x0000000000000000-0x00000000cf1effff]
[ 0.185657] NODE_DATA(0) allocated [mem 0xcf1eb000-0xcf1effff]
[ 0.185702] Zone ranges:
[ 0.185703] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.185705] DMA32 [mem 0x0000000001000000-0x00000000cf1effff]
[ 0.185706] Normal empty
[ 0.185707] Device empty
[ 0.185708] Movable zone start for each node
[ 0.185709] Early memory node ranges
[ 0.185710] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.185711] node 0: [mem 0x0000000000100000-0x00000000cf1effff]
[ 0.185722] Reserved but unavailable: 98 pages
[ 0.185724] Initmem setup node 0 [mem 0x0000000000001000-0x00000000cf1effff]
[ 0.185725] On node 0 totalpages: 848270
[ 0.185727] DMA zone: 64 pages used for memmap
[ 0.185727] DMA zone: 21 pages reserved
[ 0.185729] DMA zone: 3998 pages, LIFO batch:0
[ 0.185862] DMA32 zone: 13192 pages used for memmap
[ 0.185863] DMA32 zone: 844272 pages, LIFO batch:63
[ 0.212662] ACPI: PM-Timer IO Port: 0x4008
[ 0.212669] ACPI: Local APIC address 0xfee00000
[ 0.212812] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.212817] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.212821] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.212823] ACPI: IRQ0 used by override.
[ 0.212825] ACPI: IRQ9 used by override.
[ 0.212829] Using ACPI (MADT) for SMP configuration information
[ 0.212839] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.212872] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.212874] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.212874] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.212875] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.212878] [mem 0xcf200000-0xfebfffff] available for PCI devices
[ 0.212879] Booting paravirtualized kernel on KVM
[ 0.212883] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.353339] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.354018] percpu: Embedded 44 pages/cpu @(____ptrval____) s143192 r8192 d28840 u524288
[ 0.354031] pcpu-alloc: s143192 r8192 d28840 u524288 alloc=1*2097152
[ 0.354033] pcpu-alloc: [0] 0 1 2 3
[ 0.354073] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[ 0.354082] Built 1 zonelists, mobility grouping on. Total pages: 834993
[ 0.354083] Policy zone: DMA32
[ 0.354087] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-kali4-amd64 root=UUID=732880b8-fd60-476c-b94a-466f75962cc3 ro initrd=/install/gtk/initrd.gz quiet
[ 0.354233] Calgary: detecting Calgary via BIOS EBDA area
[ 0.354234] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.376650] Memory: 3252756K/3393080K available (10252K kernel code, 1240K rwdata, 3272K rodata, 1576K init, 2308K bss, 140324K reserved, 0K cma-reserved)
[ 0.376834] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.376845] ftrace: allocating 31773 entries in 125 pages
[ 0.397774] rcu: Hierarchical RCU implementation.
[ 0.397779] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.397788] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.402129] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[ 0.420106] Console: colour VGA+ 80x25
[ 0.420111] console [tty0] enabled
[ 0.420140] ACPI: Core revision 20180810
[ 0.420301] APIC: Switch to symmetric I/O mode setup
[ 0.420761] x2apic enabled
[ 0.421206] Switched APIC routing to physical x2apic.
[ 0.423336] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.423380] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2117d02b426, max_idle_ns: 440795283944 ns
[ 0.423409] Calibrating delay loop (skipped) preset value.. 4591.65 BogoMIPS (lpj=9183312)
[ 0.423412] pid_max: default: 32768 minimum: 301
[ 0.423453] Security Framework initialized
[ 0.423455] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.423477] AppArmor: AppArmor initialized
[ 0.424785] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.425523] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.425572] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.425595] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.426015] mce: CPU supports 0 MCE banks
[ 0.426074] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.426075] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.426078] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline
[ 0.426663] Spectre V2 : Mitigation: Full generic retpoline
[ 0.426664] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.426666] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.426952] Freeing SMP alternatives memory: 24K
[ 0.427383] APIC calibration not consistent with PM-Timer: 102ms instead of 100ms
[ 0.427383] APIC delta adjusted to PM-Timer: 6287254 (6444035)
[ 0.427383] smpboot: CPU0: AMD A10-4600M APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x10, stepping: 0x1)
[ 0.427383] Performance Events: PMU not available due to virtualization, using software events only.
[ 0.427383] rcu: Hierarchical SRCU implementation.
[ 0.427383] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.427383] smp: Bringing up secondary CPUs ...
[ 0.427383] x86: Booting SMP configuration:
[ 0.427383] .... node #0, CPUs: #1
[ 0.024872] kvm-clock: cpu 1, msr 26ddd041, secondary cpu clock
[ 0.024872] mce: CPU supports 0 MCE banks
[ 0.427383] #2
[ 0.024872] kvm-clock: cpu 2, msr 26ddd081, secondary cpu clock
[ 0.024872] mce: CPU supports 0 MCE banks
[ 0.429575] #3
[ 0.024872] kvm-clock: cpu 3, msr 26ddd0c1, secondary cpu clock
[ 0.024872] mce: CPU supports 0 MCE banks
[ 0.431419] smp: Brought up 1 node, 4 CPUs
[ 0.431419] smpboot: Max logical packages: 1
[ 0.431419] smpboot: Total of 4 processors activated (18366.62 BogoMIPS)
[ 0.431638] devtmpfs: initialized
[ 0.431638] x86/mm: Memory block size: 128MB
[ 0.431961] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.431961] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.431961] pinctrl core: initialized pinctrl subsystem
[ 0.431961] NET: Registered protocol family 16
[ 0.432052] audit: initializing netlink subsys (disabled)
[ 0.432072] audit: type=2000 audit(1556812176.696:1): state=initialized audit_enabled=0 res=1
[ 0.432072] cpuidle: using governor ladder
[ 0.432072] cpuidle: using governor menu
[ 0.432072] ACPI: bus type PCI registered
[ 0.432072] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.432072] PCI: Using configuration type 1 for base access
[ 0.432072] PCI: Using configuration type 1 for extended access
[ 0.436616] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.436616] ACPI: Added _OSI(Module Device)
[ 0.436616] ACPI: Added _OSI(Processor Device)
[ 0.436616] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.436616] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.436616] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.436616] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.439645] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.441860] ACPI: Interpreter enabled
[ 0.441873] ACPI: (supports S0 S5)
[ 0.441875] ACPI: Using IOAPIC for interrupt routing
[ 0.442104] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.442258] ACPI: Enabled 2 GPEs in block 00 to 07
[ 0.447383] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.447383] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.447931] acpi PNP0A03:00: _OSC: platform does not support [PCIeCapability LTR]
[ 0.448408] acpi PNP0A03:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.448411] acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.448413] acpi PNP0A03:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER]
[ 0.448415] acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.448847] PCI host bridge to bus 0000:00
[ 0.448852] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.448854] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.448857] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.448859] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfdffffff window]
[ 0.448861] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.448941] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.450059] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.451141] pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
[ 0.451383] pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f]
[ 0.451583] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.451585] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.451586] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.451588] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.451944] pci 0000:00:02.0: [15ad:0405] type 00 class 0x030000
[ 0.455435] pci 0000:00:02.0: reg 0x10: [io 0xd010-0xd01f]
[ 0.459438] pci 0000:00:02.0: reg 0x14: [mem 0xf0000000-0xf7ffffff]
[ 0.467433] pci 0000:00:02.0: reg 0x18: [mem 0xf8000000-0xf81fffff]
[ 0.487383] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 0.487627] pci 0000:00:03.0: reg 0x10: [mem 0xf8200000-0xf821ffff]
[ 0.491383] pci 0000:00:03.0: reg 0x18: [io 0xd020-0xd027]
[ 0.496206] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
[ 0.499383] pci 0000:00:04.0: reg 0x10: [io 0xd040-0xd05f]
[ 0.499383] pci 0000:00:04.0: reg 0x14: [mem 0xf8400000-0xf87fffff]
[ 0.499625] pci 0000:00:04.0: reg 0x18: [mem 0xf8800000-0xf8803fff pref]
[ 0.507383] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
[ 0.507383] pci 0000:00:05.0: reg 0x10: [io 0xd100-0xd1ff]
[ 0.507383] pci 0000:00:05.0: reg 0x14: [io 0xd200-0xd23f]
[ 0.507906] pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
[ 0.511383] pci 0000:00:06.0: reg 0x10: [mem 0xf8804000-0xf8804fff]
[ 0.516232] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
[ 0.516851] pci 0000:00:07.0: quirk: [io 0x4000-0x403f] claimed by PIIX4 ACPI
[ 0.516867] pci 0000:00:07.0: quirk: [io 0x4100-0x410f] claimed by PIIX4 SMB
[ 0.517361] pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
[ 0.523088] pci 0000:00:0d.0: reg 0x10: [io 0xd240-0xd247]
[ 0.523383] pci 0000:00:0d.0: reg 0x14: [io 0xd248-0xd24b]
[ 0.523437] pci 0000:00:0d.0: reg 0x18: [io 0xd250-0xd257]
[ 0.527105] pci 0000:00:0d.0: reg 0x1c: [io 0xd258-0xd25b]
[ 0.527383] pci 0000:00:0d.0: reg 0x20: [io 0xd260-0xd26f]
[ 0.527383] pci 0000:00:0d.0: reg 0x24: [mem 0xf8806000-0xf8807fff]
[ 0.531879] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
[ 0.532226] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 *10 11)
[ 0.532364] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *9 10 11)
[ 0.532514] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 10 *11)
[ 0.532832] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.532832] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.532832] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.532832] vgaarb: loaded
[ 0.532832] pps_core: LinuxPPS API ver. 1 registered
[ 0.532832] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.532832] PTP clock support registered
[ 0.532832] EDAC MC: Ver: 3.0.0
[ 0.532832] PCI: Using ACPI for IRQ routing
[ 0.532832] PCI: pci_cache_line_size set to 64 bytes
[ 0.535621] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.535629] e820: reserve RAM buffer [mem 0xcf1f0000-0xcfffffff]
[ 0.535818] clocksource: Switched to clocksource kvm-clock
[ 0.553642] VFS: Disk quotas dquot_6.6.0
[ 0.553665] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.553831] AppArmor: AppArmor Filesystem Enabled
[ 0.553863] pnp: PnP ACPI init
[ 0.553961] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.554059] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 0.554952] pnp: PnP ACPI: found 2 devices
[ 0.567185] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.567201] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.567203] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.567205] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.567207] pci_bus 0000:00: resource 7 [mem 0xcf200000-0xfdffffff window]
[ 0.567265] NET: Registered protocol family 2
[ 0.567468] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.567494] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.567602] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.567667] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.567667] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.567667] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.567667] NET: Registered protocol family 1
[ 0.567667] NET: Registered protocol family 44
[ 0.567667] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.567667] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.567667] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.567667] PCI: CLS 0 bytes, default 64
[ 0.567667] Unpacking initramfs...
[ 1.803506] Freeing initrd memory: 61564K
[ 1.803582] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2117d02b426, max_idle_ns: 440795283944 ns
[ 1.803634] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 1.804536] Initialise system trusted keyrings
[ 1.804843] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 1.806857] zbud: loaded
[ 1.807172] pstore: using deflate compression
[ 2.430601] Key type asymmetric registered
[ 2.430603] Asymmetric key parser 'x509' registered
[ 2.430624] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 2.430781] io scheduler noop registered
[ 2.430783] io scheduler deadline registered
[ 2.430836] io scheduler cfq registered (default)
[ 2.430838] io scheduler mq-deadline registered
[ 2.431172] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.431658] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.432435] Linux agpgart interface v0.103
[ 2.432561] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 2.432562] AMD IOMMUv2 functionality not available on this system
[ 2.433148] i8042: PNP: PS/2 Controller [PNP0303:pS2K,PNP0f03:pS2M] at 0x60,0x64 irq 1,12
[ 2.433869] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.433911] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.434134] mousedev: PS/2 mouse device common for all mice
[ 2.434935] rtc_cmos rtc_cmos: registered as rtc0
[ 2.434939] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.434970] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 2.435289] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.435677] NET: Registered protocol family 10
[ 2.447663] Segment Routing with IPv6
[ 2.447698] mip6: Mobile IPv6
[ 2.447702] NET: Registered protocol family 17
[ 2.447868] mpls_gso: MPLS GSO support
[ 2.448269] sched_clock: Marking stable (2427345822, 20872447)->(2648448390, -200230121)
[ 2.449362] registered taskstats version 1
[ 2.449364] Loading compiled-in X.509 certificates
[ 2.503887] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 2.503914] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 2.503958] zswap: loaded using pool lzo/zbud
[ 2.504514] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.504987] rtc_cmos rtc_cmos: setting system clock to 2019-05-02 14:19:28 UTC (1556806768)
[ 2.507979] Freeing unused kernel image memory: 1576K
[ 3.600946] Write protecting the kernel read-only data: 16384k
[ 3.604789] Freeing unused kernel image memory: 2028K
[ 3.605771] Freeing unused kernel image memory: 824K
[ 3.625564] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 3.625584] Run /init as init process
[ 3.832735] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.832764] ACPI: Power Button [PWRF]
[ 3.832897] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3
[ 3.832909] ACPI: Sleep Button [SLPF]
[ 3.836166] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.836315] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4
[ 3.841959] piix4_smbus 0000:00:07.0: SMBus Host Controller at 0x4100, revision 0
[ 3.843181] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 3.843184] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 3.856347] SCSI subsystem initialized
[ 3.856923] cryptd: max_cpu_qlen set to 1000
[ 3.862797] AVX version of gcm_enc/dec engaged.
[ 3.862799] AES CTR mode by8 optimization enabled
[ 3.870821] libata version 3.00 loaded.
[ 3.872380] ata_piix 0000:00:01.1: version 2.13
[ 3.874001] ACPI: bus type USB registered
[ 3.874034] usbcore: registered new interface driver usbfs
[ 3.874049] usbcore: registered new interface driver hub
[ 3.874093] usbcore: registered new device driver usb
[ 3.876207] ahci 0000:00:0d.0: version 3.0
[ 3.877182] scsi host0: ata_piix
[ 3.877333] ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
[ 3.877633] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 3.877637] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
[ 3.878406] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.878797] scsi host1: ata_piix
[ 3.878810] scsi host2: ahci
[ 3.878913] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 3.878915] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 3.878942] ata3: SATA max UDMA/133 abar m8192@0xf8806000 port 0xf8806100 irq 21
[ 3.880316] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.881810] ehci-pci: EHCI PCI platform driver
[ 3.883287] ohci-pci: OHCI PCI platform driver
[ 3.884481] ohci-pci 0000:00:06.0: OHCI PCI host controller
[ 3.884496] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 1
[ 3.884656] ohci-pci 0000:00:06.0: irq 22, io mem 0xf8804000
[ 3.895442] [drm] DMA map mode: Using physical TTM page addresses.
[ 3.895544] [drm] Capabilities:
[ 3.895545] [drm] Cursor.
[ 3.895546] [drm] Cursor bypass 2.
[ 3.895547] [drm] Alpha cursor.
[ 3.895547] [drm] 3D.
[ 3.895548] [drm] Extended Fifo.
[ 3.895549] [drm] Pitchlock.
[ 3.895549] [drm] Irq mask.
[ 3.895550] [drm] GMR.
[ 3.895551] [drm] Traces.
[ 3.895552] [drm] GMR2.
[ 3.895553] [drm] Screen Object 2.
[ 3.895555] [drm] Max GMR ids is 8192
[ 3.895557] [drm] Max number of GMR pages is 1048576
[ 3.895558] [drm] Max dedicated hypervisor surface memory is 396288 kiB
[ 3.895559] [drm] Maximum display memory size is 128000 kiB
[ 3.895560] [drm] VRAM at 0xf0000000 size is 128000 kiB
[ 3.895561] [drm] MMIO at 0xf8000000 size is 2048 kiB
[ 3.895565] [drm] global init.
[ 3.895698] [TTM] Zone kernel: Available graphics memory: 1659386 kiB
[ 3.895699] [TTM] Initializing pool allocator
[ 3.895707] [TTM] Initializing DMA pool allocator
[ 3.896256] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.896257] [drm] No driver support for vblank timestamp query.
[ 3.896831] [drm] Screen Objects Display Unit initialized
[ 3.896932] [drm] width 720
[ 3.896957] [drm] height 400
[ 3.897421] [drm] bpp 32
[ 3.898340] [drm] Fifo max 0x00200000 min 0x00001000 cap 0x00000355
[ 3.898364] [drm] DX: no.
[ 3.898365] [drm] Atomic: yes.
[ 3.898366] [drm] SM4_1: no.
[ 3.898395] [drm:vmw_host_log [vmwgfx]] *ERROR* Failed to send host log message.
[ 3.900365] [drm:vmw_host_log [vmwgfx]] *ERROR* Failed to send host log message.
[ 3.907440] fbcon: svgadrmfb (fb0) is primary device
[ 3.955075] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 3.955079] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.955081] usb usb1: Product: OHCI PCI host controller
[ 3.955083] usb usb1: Manufacturer: Linux 4.19.0-kali4-amd64 ohci_hcd
[ 3.955085] usb usb1: SerialNumber: 0000:00:06.0
[ 3.955372] hub 1-0:1.0: USB hub found
[ 3.955455] hub 1-0:1.0: 12 ports detected
[ 3.955512] Console: switching to colour frame buffer device 100x37
[ 3.958581] [drm] Initialized vmwgfx 2.15.0 20180704 for 0000:00:02.0 on minor 0
[ 4.002694] alg: No test for pcbc(aes) (pcbc-aes-aesni)
[ 4.043926] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 4.045234] scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 4.058104] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 4.204054] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.204224] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 4.204228] ata3.00: 48857152 sectors, multi 128: LBA48 NCQ (depth 32)
[ 4.204435] ata3.00: configured for UDMA/133
[ 4.204716] scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 4.218354] sd 2:0:0:0: [sda] 48857152 512-byte logical blocks: (25.0 GB/23.3 GiB)
[ 4.218365] sd 2:0:0:0: [sda] Write Protect is off
[ 4.218368] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.218382] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.260521] sda: sda1 sda2 < sda5 >
[ 4.261273] sd 2:0:0:0: [sda] Attached SCSI disk
[ 4.296575] sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
[ 4.296579] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.296945] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.329654] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:12:d6:19
[ 4.329663] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.351815] usb 1-1: new full-speed USB device number 2 using ohci-pci
[ 4.452554] random: fast init done
[ 4.929142] usb 1-1: New USB device found, idVendor=80ee, idProduct=0021, bcdDevice= 1.00
[ 4.929150] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 4.929153] usb 1-1: Product: USB Tablet
[ 4.929156] usb 1-1: Manufacturer: VirtualBox
[ 4.940060] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.953392] usbcore: registered new interface driver usbhid
[ 4.953395] usbhid: USB HID core driver
[ 4.958865] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/0003:80EE:0021.0001/input/input6
[ 4.959319] hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
[ 5.152966] PM: Image not found (code -22)
[ 5.410296] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.867309] random: crng init done
[ 8.054798] systemd[1]: Inserted module 'autofs4'
[ 8.262964] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 8.263122] systemd[1]: Detected virtualization oracle.
[ 8.263133] systemd[1]: Detected architecture x86-64.
[ 8.304931] systemd[1]: Set hostname to <server>.
[ 12.016909] systemd[1]: Reached target User and Group Name Lookups.
[ 12.017393] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 12.025777] systemd[1]: Created slice User and Session Slice.
[ 12.025808] systemd[1]: Reached target Slices.
[ 12.026139] systemd[1]: Listening on Journal Socket.
[ 12.028653] systemd[1]: Mounting Kernel Debug File System...
[ 12.238344] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 12.708623] systemd-journald[296]: Received request to flush runtime journal from PID 1
[ 15.757099] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 15.758479] ACPI: AC Adapter [AC] (on-line)
[ 15.778336] MCE: In-kernel MCE decoding enabled.
[ 16.156269] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 16.156337] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 16.159225] vboxguest: host-version: 6.0.6r130049 0x8000000f
[ 16.160565] vbg_heartbeat_init: Setting up heartbeat to trigger every 2000 milliseconds
[ 16.160714] input: VirtualBox mouse integration as /devices/pci0000:00/0000:00:04.0/input/input8
[ 16.164739] vboxguest: misc device minor 58, IRQ 20, I/O port d040, MMIO at 0x00000000f8400000 (size 0x0000000000400000)
[ 17.054062] snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000
[ 17.290037] Adding 3391484k swap on /dev/sda5. Priority:-2 extents:1 across:3391484k FS
[ 25.576549] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.581473] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.583896] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 25.584634] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 78.948345] fuse init (API version 7.27)
root@server:~#
1. Usb устройство добавлено в самой VM?(создан соответствующий фильтр или нет)
2. Попробуй в VM выбрать версию USB 1.0
3. вывод lsusb и dmesg сразу после загрузки студию.
root@server:~# lsusb
Bus 001 Device 002: ID 80ee:0021 VirtualBox USB Tablet
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 

InetTester

Green Team
21.10.2018
308
43
BIT
5
вот что получилось
root@server:~# dmesg
[ 0.000000] Linux version 4.19.0-kali4-amd64 (devel@kali.org) (gcc version 8.3.0 (Debian 8.3.0-2)) #1 SMP Debian 4.19.28-2kali1 (2019-03-18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-kali4-amd64 root=UUID=732880b8-fd60-476c-b94a-466f75962cc3 ro initrd=/install/gtk/initrd.gz quiet
[ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency!
[ 0.000000] random: get_random_u32 called from bsp_init_amd+0x20b/0x2b0 with crng_init=0
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf1effff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf1f0000-0x00000000cf1fffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000001] kvm-clock: cpu 0, msr 26ddd001, primary cpu clock
[ 0.000001] kvm-clock: using sched offset of 1976591843966 cycles
[ 0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000009] tsc: Detected 2295.828 MHz processor
[ 0.005664] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.005678] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.005685] last_pfn = 0xcf1f0 max_arch_pfn = 0x400000000
[ 0.005707] MTRR default type: uncachable
[ 0.005708] MTRR variable ranges disabled:
[ 0.005709] Disabled
[ 0.005710] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[ 0.005714] CPU MTRRs all blank - virtualized system.
[ 0.005718] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.184818] Base memory trampoline at [(____ptrval____)] 99000 size 24576
[ 0.184851] BRK [0x27001000, 0x27001fff] PGTABLE
[ 0.184854] BRK [0x27002000, 0x27002fff] PGTABLE
[ 0.184856] BRK [0x27003000, 0x27003fff] PGTABLE
[ 0.184892] BRK [0x27004000, 0x27004fff] PGTABLE
[ 0.184895] BRK [0x27005000, 0x27005fff] PGTABLE
[ 0.184969] BRK [0x27006000, 0x27006fff] PGTABLE
[ 0.185081] BRK [0x27007000, 0x27007fff] PGTABLE
[ 0.185133] RAMDISK: [mem 0x307b1000-0x343cffff]
[ 0.185149] ACPI: Early table checksum verification disabled
[ 0.185190] ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX )
[ 0.185208] ACPI: XSDT 0x00000000CF1F0030 00003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
[ 0.185218] ACPI: FACP 0x00000000CF1F00F0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
[ 0.185228] ACPI: DSDT 0x00000000CF1F0480 0022EA (v02 VBOX VBOXBIOS 00000002 INTL 20100528)
[ 0.185235] ACPI: FACS 0x00000000CF1F0200 000040
[ 0.185241] ACPI: FACS 0x00000000CF1F0200 000040
[ 0.185246] ACPI: APIC 0x00000000CF1F0240 00006C (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
[ 0.185255] ACPI: SSDT 0x00000000CF1F02B0 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
[ 0.185291] ACPI: Local APIC address 0xfee00000
[ 0.185651] No NUMA configuration found
[ 0.185652] Faking a node at [mem 0x0000000000000000-0x00000000cf1effff]
[ 0.185657] NODE_DATA(0) allocated [mem 0xcf1eb000-0xcf1effff]
[ 0.185702] Zone ranges:
[ 0.185703] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.185705] DMA32 [mem 0x0000000001000000-0x00000000cf1effff]
[ 0.185706] Normal empty
[ 0.185707] Device empty
[ 0.185708] Movable zone start for each node
[ 0.185709] Early memory node ranges
[ 0.185710] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.185711] node 0: [mem 0x0000000000100000-0x00000000cf1effff]
[ 0.185722] Reserved but unavailable: 98 pages
[ 0.185724] Initmem setup node 0 [mem 0x0000000000001000-0x00000000cf1effff]
[ 0.185725] On node 0 totalpages: 848270
[ 0.185727] DMA zone: 64 pages used for memmap
[ 0.185727] DMA zone: 21 pages reserved
[ 0.185729] DMA zone: 3998 pages, LIFO batch:0
[ 0.185862] DMA32 zone: 13192 pages used for memmap
[ 0.185863] DMA32 zone: 844272 pages, LIFO batch:63
[ 0.212662] ACPI: PM-Timer IO Port: 0x4008
[ 0.212669] ACPI: Local APIC address 0xfee00000
[ 0.212812] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.212817] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.212821] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.212823] ACPI: IRQ0 used by override.
[ 0.212825] ACPI: IRQ9 used by override.
[ 0.212829] Using ACPI (MADT) for SMP configuration information
[ 0.212839] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.212872] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.212874] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.212874] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.212875] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.212878] [mem 0xcf200000-0xfebfffff] available for PCI devices
[ 0.212879] Booting paravirtualized kernel on KVM
[ 0.212883] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.353339] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.354018] percpu: Embedded 44 pages/cpu @(____ptrval____) s143192 r8192 d28840 u524288
[ 0.354031] pcpu-alloc: s143192 r8192 d28840 u524288 alloc=1*2097152
[ 0.354033] pcpu-alloc: [0] 0 1 2 3
[ 0.354073] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[ 0.354082] Built 1 zonelists, mobility grouping on. Total pages: 834993
[ 0.354083] Policy zone: DMA32
[ 0.354087] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-kali4-amd64 root=UUID=732880b8-fd60-476c-b94a-466f75962cc3 ro initrd=/install/gtk/initrd.gz quiet
[ 0.354233] Calgary: detecting Calgary via BIOS EBDA area
[ 0.354234] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.376650] Memory: 3252756K/3393080K available (10252K kernel code, 1240K rwdata, 3272K rodata, 1576K init, 2308K bss, 140324K reserved, 0K cma-reserved)
[ 0.376834] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.376845] ftrace: allocating 31773 entries in 125 pages
[ 0.397774] rcu: Hierarchical RCU implementation.
[ 0.397779] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.397788] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.402129] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[ 0.420106] Console: colour VGA+ 80x25
[ 0.420111] console [tty0] enabled
[ 0.420140] ACPI: Core revision 20180810
[ 0.420301] APIC: Switch to symmetric I/O mode setup
[ 0.420761] x2apic enabled
[ 0.421206] Switched APIC routing to physical x2apic.
[ 0.423336] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.423380] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2117d02b426, max_idle_ns: 440795283944 ns
[ 0.423409] Calibrating delay loop (skipped) preset value.. 4591.65 BogoMIPS (lpj=9183312)
[ 0.423412] pid_max: default: 32768 minimum: 301
[ 0.423453] Security Framework initialized
[ 0.423455] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.423477] AppArmor: AppArmor initialized
[ 0.424785] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.425523] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.425572] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.425595] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.426015] mce: CPU supports 0 MCE banks
[ 0.426074] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.426075] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.426078] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline
[ 0.426663] Spectre V2 : Mitigation: Full generic retpoline
[ 0.426664] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.426666] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.426952] Freeing SMP alternatives memory: 24K
[ 0.427383] APIC calibration not consistent with PM-Timer: 102ms instead of 100ms
[ 0.427383] APIC delta adjusted to PM-Timer: 6287254 (6444035)
[ 0.427383] smpboot: CPU0: AMD A10-4600M APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x10, stepping: 0x1)
[ 0.427383] Performance Events: PMU not available due to virtualization, using software events only.
[ 0.427383] rcu: Hierarchical SRCU implementation.
[ 0.427383] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.427383] smp: Bringing up secondary CPUs ...
[ 0.427383] x86: Booting SMP configuration:
[ 0.427383] .... node #0, CPUs: #1
[ 0.024872] kvm-clock: cpu 1, msr 26ddd041, secondary cpu clock
[ 0.024872] mce: CPU supports 0 MCE banks
[ 0.427383] #2
[ 0.024872] kvm-clock: cpu 2, msr 26ddd081, secondary cpu clock
[ 0.024872] mce: CPU supports 0 MCE banks
[ 0.429575] #3
[ 0.024872] kvm-clock: cpu 3, msr 26ddd0c1, secondary cpu clock
[ 0.024872] mce: CPU supports 0 MCE banks
[ 0.431419] smp: Brought up 1 node, 4 CPUs
[ 0.431419] smpboot: Max logical packages: 1
[ 0.431419] smpboot: Total of 4 processors activated (18366.62 BogoMIPS)
[ 0.431638] devtmpfs: initialized
[ 0.431638] x86/mm: Memory block size: 128MB
[ 0.431961] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.431961] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.431961] pinctrl core: initialized pinctrl subsystem
[ 0.431961] NET: Registered protocol family 16
[ 0.432052] audit: initializing netlink subsys (disabled)
[ 0.432072] audit: type=2000 audit(1556812176.696:1): state=initialized audit_enabled=0 res=1
[ 0.432072] cpuidle: using governor ladder
[ 0.432072] cpuidle: using governor menu
[ 0.432072] ACPI: bus type PCI registered
[ 0.432072] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.432072] PCI: Using configuration type 1 for base access
[ 0.432072] PCI: Using configuration type 1 for extended access
[ 0.436616] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.436616] ACPI: Added _OSI(Module Device)
[ 0.436616] ACPI: Added _OSI(Processor Device)
[ 0.436616] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.436616] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.436616] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.436616] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.439645] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.441860] ACPI: Interpreter enabled
[ 0.441873] ACPI: (supports S0 S5)
[ 0.441875] ACPI: Using IOAPIC for interrupt routing
[ 0.442104] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.442258] ACPI: Enabled 2 GPEs in block 00 to 07
[ 0.447383] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.447383] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.447931] acpi PNP0A03:00: _OSC: platform does not support [PCIeCapability LTR]
[ 0.448408] acpi PNP0A03:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.448411] acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.448413] acpi PNP0A03:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER]
[ 0.448415] acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.448847] PCI host bridge to bus 0000:00
[ 0.448852] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.448854] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.448857] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.448859] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfdffffff window]
[ 0.448861] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.448941] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.450059] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.451141] pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
[ 0.451383] pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f]
[ 0.451583] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.451585] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.451586] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.451588] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.451944] pci 0000:00:02.0: [15ad:0405] type 00 class 0x030000
[ 0.455435] pci 0000:00:02.0: reg 0x10: [io 0xd010-0xd01f]
[ 0.459438] pci 0000:00:02.0: reg 0x14: [mem 0xf0000000-0xf7ffffff]
[ 0.467433] pci 0000:00:02.0: reg 0x18: [mem 0xf8000000-0xf81fffff]
[ 0.487383] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 0.487627] pci 0000:00:03.0: reg 0x10: [mem 0xf8200000-0xf821ffff]
[ 0.491383] pci 0000:00:03.0: reg 0x18: [io 0xd020-0xd027]
[ 0.496206] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
[ 0.499383] pci 0000:00:04.0: reg 0x10: [io 0xd040-0xd05f]
[ 0.499383] pci 0000:00:04.0: reg 0x14: [mem 0xf8400000-0xf87fffff]
[ 0.499625] pci 0000:00:04.0: reg 0x18: [mem 0xf8800000-0xf8803fff pref]
[ 0.507383] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
[ 0.507383] pci 0000:00:05.0: reg 0x10: [io 0xd100-0xd1ff]
[ 0.507383] pci 0000:00:05.0: reg 0x14: [io 0xd200-0xd23f]
[ 0.507906] pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
[ 0.511383] pci 0000:00:06.0: reg 0x10: [mem 0xf8804000-0xf8804fff]
[ 0.516232] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
[ 0.516851] pci 0000:00:07.0: quirk: [io 0x4000-0x403f] claimed by PIIX4 ACPI
[ 0.516867] pci 0000:00:07.0: quirk: [io 0x4100-0x410f] claimed by PIIX4 SMB
[ 0.517361] pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
[ 0.523088] pci 0000:00:0d.0: reg 0x10: [io 0xd240-0xd247]
[ 0.523383] pci 0000:00:0d.0: reg 0x14: [io 0xd248-0xd24b]
[ 0.523437] pci 0000:00:0d.0: reg 0x18: [io 0xd250-0xd257]
[ 0.527105] pci 0000:00:0d.0: reg 0x1c: [io 0xd258-0xd25b]
[ 0.527383] pci 0000:00:0d.0: reg 0x20: [io 0xd260-0xd26f]
[ 0.527383] pci 0000:00:0d.0: reg 0x24: [mem 0xf8806000-0xf8807fff]
[ 0.531879] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
[ 0.532226] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 *10 11)
[ 0.532364] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *9 10 11)
[ 0.532514] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 10 *11)
[ 0.532832] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.532832] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.532832] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.532832] vgaarb: loaded
[ 0.532832] pps_core: LinuxPPS API ver. 1 registered
[ 0.532832] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.532832] PTP clock support registered
[ 0.532832] EDAC MC: Ver: 3.0.0
[ 0.532832] PCI: Using ACPI for IRQ routing
[ 0.532832] PCI: pci_cache_line_size set to 64 bytes
[ 0.535621] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.535629] e820: reserve RAM buffer [mem 0xcf1f0000-0xcfffffff]
[ 0.535818] clocksource: Switched to clocksource kvm-clock
[ 0.553642] VFS: Disk quotas dquot_6.6.0
[ 0.553665] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.553831] AppArmor: AppArmor Filesystem Enabled
[ 0.553863] pnp: PnP ACPI init
[ 0.553961] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.554059] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 0.554952] pnp: PnP ACPI: found 2 devices
[ 0.567185] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.567201] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.567203] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.567205] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.567207] pci_bus 0000:00: resource 7 [mem 0xcf200000-0xfdffffff window]
[ 0.567265] NET: Registered protocol family 2
[ 0.567468] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.567494] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.567602] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.567667] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.567667] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.567667] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.567667] NET: Registered protocol family 1
[ 0.567667] NET: Registered protocol family 44
[ 0.567667] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.567667] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.567667] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.567667] PCI: CLS 0 bytes, default 64
[ 0.567667] Unpacking initramfs...
[ 1.803506] Freeing initrd memory: 61564K
[ 1.803582] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2117d02b426, max_idle_ns: 440795283944 ns
[ 1.803634] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 1.804536] Initialise system trusted keyrings
[ 1.804843] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 1.806857] zbud: loaded
[ 1.807172] pstore: using deflate compression
[ 2.430601] Key type asymmetric registered
[ 2.430603] Asymmetric key parser 'x509' registered
[ 2.430624] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 2.430781] io scheduler noop registered
[ 2.430783] io scheduler deadline registered
[ 2.430836] io scheduler cfq registered (default)
[ 2.430838] io scheduler mq-deadline registered
[ 2.431172] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.431658] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.432435] Linux agpgart interface v0.103
[ 2.432561] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 2.432562] AMD IOMMUv2 functionality not available on this system
[ 2.433148] i8042: PNP: PS/2 Controller [PNP0303:pS2K,PNP0f03:pS2M] at 0x60,0x64 irq 1,12
[ 2.433869] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.433911] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.434134] mousedev: PS/2 mouse device common for all mice
[ 2.434935] rtc_cmos rtc_cmos: registered as rtc0
[ 2.434939] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.434970] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 2.435289] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.435677] NET: Registered protocol family 10
[ 2.447663] Segment Routing with IPv6
[ 2.447698] mip6: Mobile IPv6
[ 2.447702] NET: Registered protocol family 17
[ 2.447868] mpls_gso: MPLS GSO support
[ 2.448269] sched_clock: Marking stable (2427345822, 20872447)->(2648448390, -200230121)
[ 2.449362] registered taskstats version 1
[ 2.449364] Loading compiled-in X.509 certificates
[ 2.503887] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 2.503914] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 2.503958] zswap: loaded using pool lzo/zbud
[ 2.504514] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.504987] rtc_cmos rtc_cmos: setting system clock to 2019-05-02 14:19:28 UTC (1556806768)
[ 2.507979] Freeing unused kernel image memory: 1576K
[ 3.600946] Write protecting the kernel read-only data: 16384k
[ 3.604789] Freeing unused kernel image memory: 2028K
[ 3.605771] Freeing unused kernel image memory: 824K
[ 3.625564] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 3.625584] Run /init as init process
[ 3.832735] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.832764] ACPI: Power Button [PWRF]
[ 3.832897] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3
[ 3.832909] ACPI: Sleep Button [SLPF]
[ 3.836166] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.836315] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4
[ 3.841959] piix4_smbus 0000:00:07.0: SMBus Host Controller at 0x4100, revision 0
[ 3.843181] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 3.843184] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 3.856347] SCSI subsystem initialized
[ 3.856923] cryptd: max_cpu_qlen set to 1000
[ 3.862797] AVX version of gcm_enc/dec engaged.
[ 3.862799] AES CTR mode by8 optimization enabled
[ 3.870821] libata version 3.00 loaded.
[ 3.872380] ata_piix 0000:00:01.1: version 2.13
[ 3.874001] ACPI: bus type USB registered
[ 3.874034] usbcore: registered new interface driver usbfs
[ 3.874049] usbcore: registered new interface driver hub
[ 3.874093] usbcore: registered new device driver usb
[ 3.876207] ahci 0000:00:0d.0: version 3.0
[ 3.877182] scsi host0: ata_piix
[ 3.877333] ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
[ 3.877633] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 3.877637] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
[ 3.878406] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.878797] scsi host1: ata_piix
[ 3.878810] scsi host2: ahci
[ 3.878913] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 3.878915] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 3.878942] ata3: SATA max UDMA/133 abar m8192@0xf8806000 port 0xf8806100 irq 21
[ 3.880316] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.881810] ehci-pci: EHCI PCI platform driver
[ 3.883287] ohci-pci: OHCI PCI platform driver
[ 3.884481] ohci-pci 0000:00:06.0: OHCI PCI host controller
[ 3.884496] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 1
[ 3.884656] ohci-pci 0000:00:06.0: irq 22, io mem 0xf8804000
[ 3.895442] [drm] DMA map mode: Using physical TTM page addresses.
[ 3.895544] [drm] Capabilities:
[ 3.895545] [drm] Cursor.
[ 3.895546] [drm] Cursor bypass 2.
[ 3.895547] [drm] Alpha cursor.
[ 3.895547] [drm] 3D.
[ 3.895548] [drm] Extended Fifo.
[ 3.895549] [drm] Pitchlock.
[ 3.895549] [drm] Irq mask.
[ 3.895550] [drm] GMR.
[ 3.895551] [drm] Traces.
[ 3.895552] [drm] GMR2.
[ 3.895553] [drm] Screen Object 2.
[ 3.895555] [drm] Max GMR ids is 8192
[ 3.895557] [drm] Max number of GMR pages is 1048576
[ 3.895558] [drm] Max dedicated hypervisor surface memory is 396288 kiB
[ 3.895559] [drm] Maximum display memory size is 128000 kiB
[ 3.895560] [drm] VRAM at 0xf0000000 size is 128000 kiB
[ 3.895561] [drm] MMIO at 0xf8000000 size is 2048 kiB
[ 3.895565] [drm] global init.
[ 3.895698] [TTM] Zone kernel: Available graphics memory: 1659386 kiB
[ 3.895699] [TTM] Initializing pool allocator
[ 3.895707] [TTM] Initializing DMA pool allocator
[ 3.896256] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.896257] [drm] No driver support for vblank timestamp query.
[ 3.896831] [drm] Screen Objects Display Unit initialized
[ 3.896932] [drm] width 720
[ 3.896957] [drm] height 400
[ 3.897421] [drm] bpp 32
[ 3.898340] [drm] Fifo max 0x00200000 min 0x00001000 cap 0x00000355
[ 3.898364] [drm] DX: no.
[ 3.898365] [drm] Atomic: yes.
[ 3.898366] [drm] SM4_1: no.
[ 3.898395] [drm:vmw_host_log [vmwgfx]] *ERROR* Failed to send host log message.
[ 3.900365] [drm:vmw_host_log [vmwgfx]] *ERROR* Failed to send host log message.
[ 3.907440] fbcon: svgadrmfb (fb0) is primary device
[ 3.955075] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 3.955079] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.955081] usb usb1: Product: OHCI PCI host controller
[ 3.955083] usb usb1: Manufacturer: Linux 4.19.0-kali4-amd64 ohci_hcd
[ 3.955085] usb usb1: SerialNumber: 0000:00:06.0
[ 3.955372] hub 1-0:1.0: USB hub found
[ 3.955455] hub 1-0:1.0: 12 ports detected
[ 3.955512] Console: switching to colour frame buffer device 100x37
[ 3.958581] [drm] Initialized vmwgfx 2.15.0 20180704 for 0000:00:02.0 on minor 0
[ 4.002694] alg: No test for pcbc(aes) (pcbc-aes-aesni)
[ 4.043926] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 4.045234] scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 4.058104] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 4.204054] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.204224] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 4.204228] ata3.00: 48857152 sectors, multi 128: LBA48 NCQ (depth 32)
[ 4.204435] ata3.00: configured for UDMA/133
[ 4.204716] scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 4.218354] sd 2:0:0:0: [sda] 48857152 512-byte logical blocks: (25.0 GB/23.3 GiB)
[ 4.218365] sd 2:0:0:0: [sda] Write Protect is off
[ 4.218368] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.218382] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.260521] sda: sda1 sda2 < sda5 >
[ 4.261273] sd 2:0:0:0: [sda] Attached SCSI disk
[ 4.296575] sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
[ 4.296579] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.296945] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.329654] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:12:d6:19
[ 4.329663] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.351815] usb 1-1: new full-speed USB device number 2 using ohci-pci
[ 4.452554] random: fast init done
[ 4.929142] usb 1-1: New USB device found, idVendor=80ee, idProduct=0021, bcdDevice= 1.00
[ 4.929150] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 4.929153] usb 1-1: Product: USB Tablet
[ 4.929156] usb 1-1: Manufacturer: VirtualBox
[ 4.940060] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.953392] usbcore: registered new interface driver usbhid
[ 4.953395] usbhid: USB HID core driver
[ 4.958865] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/0003:80EE:0021.0001/input/input6
[ 4.959319] hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
[ 5.152966] PM: Image not found (code -22)
[ 5.410296] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.867309] random: crng init done
[ 8.054798] systemd[1]: Inserted module 'autofs4'
[ 8.262964] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 8.263122] systemd[1]: Detected virtualization oracle.
[ 8.263133] systemd[1]: Detected architecture x86-64.
[ 8.304931] systemd[1]: Set hostname to <server>.
[ 12.016909] systemd[1]: Reached target User and Group Name Lookups.
[ 12.017393] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 12.025777] systemd[1]: Created slice User and Session Slice.
[ 12.025808] systemd[1]: Reached target Slices.
[ 12.026139] systemd[1]: Listening on Journal Socket.
[ 12.028653] systemd[1]: Mounting Kernel Debug File System...
[ 12.238344] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 12.708623] systemd-journald[296]: Received request to flush runtime journal from PID 1
[ 15.757099] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 15.758479] ACPI: AC Adapter [AC] (on-line)
[ 15.778336] MCE: In-kernel MCE decoding enabled.
[ 16.156269] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 16.156337] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 16.159225] vboxguest: host-version: 6.0.6r130049 0x8000000f
[ 16.160565] vbg_heartbeat_init: Setting up heartbeat to trigger every 2000 milliseconds
[ 16.160714] input: VirtualBox mouse integration as /devices/pci0000:00/0000:00:04.0/input/input8
[ 16.164739] vboxguest: misc device minor 58, IRQ 20, I/O port d040, MMIO at 0x00000000f8400000 (size 0x0000000000400000)
[ 17.054062] snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000
[ 17.290037] Adding 3391484k swap on /dev/sda5. Priority:-2 extents:1 across:3391484k FS
[ 25.576549] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.581473] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.583896] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 25.584634] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 78.948345] fuse init (API version 7.27)
root@server:~#

root@server:~# lsusb
Bus 001 Device 002: ID 80ee:0021 VirtualBox USB Tablet
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


В настройках виртуальной машины в меню 'usb' данный адаптер добавлен?(Когда я выше писал про фильтр то я имел ввиду именно это)
 

Mamai

Green Team
24.04.2019
34
1
BIT
0

Вложения

  • 20190503_180556.jpg
    20190503_180556.jpg
    283,2 КБ · Просмотры: 521
  • 20190503_180918.jpg
    20190503_180918.jpg
    142,8 КБ · Просмотры: 328
  • 20190503_180918.jpg
    20190503_180918.jpg
    142,8 КБ · Просмотры: 324
  • 20190503_180930.jpg
    20190503_180930.jpg
    316,2 КБ · Просмотры: 517

InetTester

Green Team
21.10.2018
308
43
BIT
5
Я наверное плохо понимаю конечную цель автора, исходя из формулировки вопроса.
Что требуется сделать? Перевести в режим мониторинга данный адаптер?Данный адаптер используется для связи между основной ОС и VM, перевести его в режим мониторинга не выйдет, требуется подключить второй адаптер который будет использоваться для связи с основной ОС а данный 'пробросить'(добавить в меню USB) в виртуалку.
 

Mamai

Green Team
24.04.2019
34
1
BIT
0
Да в режим маниторинга и почему вм. Не видет WiFi . На ноутбуке есть встроиный WiFi адаптер его пожелания не видет вм. Раньше этот usb адаптер спокойно определялся и был в режиме маниторинга
 
Мы в соцсетях:

Обучение наступательной кибербезопасности в игровой форме. Начать игру!