Не работает HashCat

[Samir Programmer]

Когда ввожу хэш в hashcat, выходит такая ошибка:
hashcat (v5.1.0) starting...

* Device #1: CUDA SDK Toolkit installation NOT detected.
CUDA SDK Toolkit installation required for proper device support and utilization
Falling back to OpenCL Runtime

* Device #1: WARNING! Kernel exec timeout is not disabled.
This may cause "CL_OUT_OF_RESOURCES" or related errors.
To disable the timeout, see: timeout_patch [hashcat wiki]
* Device #2: Intel's OpenCL runtime (GPU only) is currently broken.
We are waiting for updated OpenCL drivers from Intel.
You can use --force to override, but do not report related errors.
nvmlDeviceGetFanSpeed(): Not Supported

OpenCL API (OpenCL 3.0 CUDA 12.1.112) - Platform #1 [NVIDIA Corporation]
========================================================================
* Device #1: NVIDIA GeForce RTX 3060 Laptop GPU, 1535/6143 MB allocatable, 30MCU

OpenCL API (OpenCL 3.0 ) - Platform #2 [Intel(R) Corporation]
=============================================================
* Device #2: Intel(R) UHD Graphics, skipped

Hashes: 1 digests; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Rules: 77

Applicable optimizers:
* Optimized-Kernel
* Zero-Byte
* Precompute-Init
* Meet-In-The-Middle
* Early-Skip
* Not-Salted
* Not-Iterated
* Single-Hash
* Single-Salt
* Raw-Hash

Minimum password length supported by kernel: 0
Maximum password length supported by kernel: 31

Watchdog: Temperature abort trigger set to 90c

Initializing backend runtime for device #1...

Что делать?

 

[Exited3n]

Когда ввожу хэш в hashcat, выходит такая ошибка:
hashcat (v5.1.0) starting...

* Device #1: CUDA SDK Toolkit installation NOT detected.
CUDA SDK Toolkit installation required for proper device support and utilization
Falling back to OpenCL Runtime

* Device #1: WARNING! Kernel exec timeout is not disabled.
This may cause "CL_OUT_OF_RESOURCES" or related errors.
To disable the timeout, see: timeout_patch [hashcat wiki]
* Device #2: Intel's OpenCL runtime (GPU only) is currently broken.
We are waiting for updated OpenCL drivers from Intel.
You can use --force to override, but do not report related errors.
nvmlDeviceGetFanSpeed(): Not Supported

OpenCL API (OpenCL 3.0 CUDA 12.1.112) - Platform #1 [NVIDIA Corporation]
========================================================================
* Device #1: NVIDIA GeForce RTX 3060 Laptop GPU, 1535/6143 MB allocatable, 30MCU

OpenCL API (OpenCL 3.0 ) - Platform #2 [Intel(R) Corporation]
=============================================================
* Device #2: Intel(R) UHD Graphics, skipped

Hashes: 1 digests; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Rules: 77

Applicable optimizers:
* Optimized-Kernel
* Zero-Byte
* Precompute-Init
* Meet-In-The-Middle
* Early-Skip
* Not-Salted
* Not-Iterated
* Single-Hash
* Single-Salt
* Raw-Hash

Minimum password length supported by kernel: 0
Maximum password length supported by kernel: 31

Watchdog: Temperature abort trigger set to 90c

Initializing backend runtime for device #1...

Что делать?

Начни с того что установи последние драйвера на nvidia и поставь свежую CUDA

Да, и как бы hashcat посвежее поставь...

hashcat.exe --version
v6.2.6

 

[Samir Programmer]

Начни с того что установи последние драйвера на nvidia и поставь свежую CUDA

Да, и как бы hashcat посвежее поставь...

hashcat.exe --version
v6.2.6

а где писать
hashcat.exe --version
v6.2.6?

Насчет cuda не знаю, но нвидиа последние драйвера стоят

 

[nick8606]

а где писать
hashcat.exe --version
v6.2.6?

Не надо это писать.
Просто попробуйте с последним официальным релизом

https://github.com/hashcat/hashcat

Версия 5.1.0 выпущена в 2018 году, морально и технологически устарела.

 

[Samir Programmer]

Не надо это писать.
Просто попробуйте с последним официальным релизом

https://github.com/hashcat/hashcat

Версия 5.1.0 выпущена в 2018 году, морально и технологически устарела.

поставил 6.2.6, все равно не работает (

 

[nick8606]

Откройте "docs/readme.txt", там написано, какой софт (драйверы и пр.) нужен для работы. Убедитесь, что он у вас установлен.