Вечер добрый! Получаю ошибку, прикрепляю конфиг, что с ним не так?
Режимы TRX, RSSIBIN, следование за ARFCN от БС так же успешно запускается, а вот при запуске MSC, HLR, и СМС-сервиса ругается на конфиг. Как я понимаю данные порты заняты, после ввода osmo-bts-trx —debug DRSL::OML::LAPDM -r 99 получил:
следовательно мне нужно изменить порты?
Режимы TRX, RSSIBIN, следование за ARFCN от БС так же успешно запускается, а вот при запуске MSC, HLR, и СМС-сервиса ругается на конфиг. Как я понимаю данные порты заняты, после ввода osmo-bts-trx —debug DRSL::OML::LAPDM -r 99 получил:
root@space:~/.osmocom# osmo-bts-trx --debug DRSLOMLLAPDM -r 99
((*))
|
/ \ OsmoBTS
<0001> oml.c:1462 Initializing OML attribute definitions
'no osmotrx ms-power-loop' is deprecated, use of BTS control loop is managed by BSC
<0017> control_if.c:911 CTRL at 127.0.0.1 4238
<0010> telnet_interface.c:104 Available via telnet 127.0.0.1 4241
<0012> input/ipaccess.c:901 enabling ipaccess BTS mode, OML connecting to 127.0.0.1:3002
<000b> trx_if.c:1174 phy0.0: Open transceiver
<000d> abis.c:142 Signalling link down
<0001> bts.c:292 Shutting down BTS 0, Reason Abis close
<000b> trx_if.c:185 phy0.0: No satisfactory response from transceiver(CMD POWEROFF)
Shutdown timer expired
((*))
|
/ \ OsmoBTS
<0001> oml.c:1462 Initializing OML attribute definitions
'no osmotrx ms-power-loop' is deprecated, use of BTS control loop is managed by BSC
<0017> control_if.c:911 CTRL at 127.0.0.1 4238
<0010> telnet_interface.c:104 Available via telnet 127.0.0.1 4241
<0012> input/ipaccess.c:901 enabling ipaccess BTS mode, OML connecting to 127.0.0.1:3002
<000b> trx_if.c:1174 phy0.0: Open transceiver
<000d> abis.c:142 Signalling link down
<0001> bts.c:292 Shutting down BTS 0, Reason Abis close
<000b> trx_if.c:185 phy0.0: No satisfactory response from transceiver(CMD POWEROFF)
Shutdown timer expired
следовательно мне нужно изменить порты?
! | |
! OpenBSC (1.0.0.14-98a2ba) configuration saved from vty | |
!! | |
password foo | |
! | |
log stderr | |
logging filter all 1 | |
logging color 1 | |
logging print category 0 | |
logging timestamp 0 | |
logging print file 1 | |
logging level all everything | |
logging level rll notice | |
logging level cc notice | |
logging level mm notice | |
logging level rr notice | |
logging level rsl notice | |
logging level nm info | |
logging level mncc notice | |
logging level pag notice | |
logging level meas notice | |
logging level sccp notice | |
logging level msc notice | |
logging level mgcp notice | |
logging level ho notice | |
logging level db notice | |
logging level ref notice | |
logging level gprs debug | |
logging level ns info | |
logging level bssgp debug | |
logging level llc debug | |
logging level sndcp debug | |
logging level nat notice | |
logging level ctrl notice | |
logging level smpp debug | |
logging level filter debug | |
logging level ranap debug | |
logging level sua debug | |
logging level pcu debug | |
logging level lglobal notice | |
logging level llapd notice | |
logging level linp notice | |
logging level lmux notice | |
logging level lmi notice | |
logging level lmib notice | |
logging level lsms notice | |
logging level lctrl notice | |
logging level lgtp notice | |
logging level lstats notice | |
logging level lgsup notice | |
logging level loap notice | |
logging level lss7 notice | |
logging level lsccp notice | |
logging level lsua notice | |
logging level lm3ua notice | |
logging level lmgcp notice | |
! | |
stats interval 5 | |
! | |
line vty | |
no login | |
! | |
e1_input | |
e1_line 0 driver ipa | |
e1_line 0 port 0 | |
no e1_line 0 keepalive | |
network | |
network country code 1 | |
mobile network code 1 | |
short name OpenBSC | |
long name OpenBSC | |
auth policy closed | |
authorized-regexp .* | |
location updating reject cause 13 | |
encryption a5 0 | |
neci 1 | |
paging any use tch 0 | |
rrlp mode none | |
mm info 1 | |
handover 0 | |
handover window rxlev averaging 10 | |
handover window rxqual averaging 1 | |
handover window rxlev neighbor averaging 10 | |
handover power budget interval 6 | |
handover power budget hysteresis 3 | |
handover maximum distance 9999 | |
dyn_ts_allow_tch_f 0 | |
subscriber-keep-in-ram 0 | |
bts 0 | |
type sysmobts | |
band GSM900 | |
cell_identity 0 | |
location_area_code 1 | |
base_station_id_code 63 | |
ms max power 35 | |
cell reselection hysteresis 4 | |
rxlev access min 0 | |
periodic location update 30 | |
radio-link-timeout 32 | |
channel allocator ascending | |
rach tx integer 9 | |
rach max transmission 7 | |
channel-descrption attach 1 | |
channel-descrption bs-pa-mfrms 5 | |
channel-descrption bs-ag-blks-res 1 | |
early-classmark-sending forbidden | |
early-classmark-sending-3g allowed | |
ip.access unit_id 1801 0 | |
oml ip.access stream_id 255 line 0 | |
neighbor-list mode automatic | |
codec-support fr efr amr | |
amr tch-f modes 2 | |
amr tch-f start-mode 1 | |
gprs mode gprs | |
gprs routing area 1 | |
gprs cell bvci 1234 | |
gprs nsei 1234 | |
gprs nsvc 0 nsvci 1234 | |
gprs nsvc 0 local udp port 23001 | |
gprs nsvc 0 remote udp port 23000 | |
gprs nsvc 0 remote ip 127.0.0.1 | |
no force-combined-si | |
trx 0 | |
rf_locked 0 | |
arfcn 975 | |
nominal power 13 | |
max_power_red 0 | |
rsl e1 tei 0 | |
timeslot 0 | |
phys_chan_config CCCH+SDCCH4 | |
hopping enabled 0 | |
timeslot 1 | |
phys_chan_config SDCCH8 | |
hopping enabled 0 | |
timeslot 2 | |
phys_chan_config TCH/F | |
hopping enabled 0 | |
timeslot 3 | |
phys_chan_config TCH/F | |
hopping enabled 0 | |
timeslot 4 | |
phys_chan_config PDCH | |
hopping enabled 0 | |
timeslot 5 | |
phys_chan_config PDCH | |
hopping enabled 0 | |
timeslot 6 | |
phys_chan_config PDCH | |
hopping enabled 0 | |
timeslot 7 | |
phys_chan_config PDCH | |
hopping enabled 0 | |
mncc-int | |
default-codec tch-f fr | |
default-codec tch-h hr | |
nitb | |
subscriber-create-on-demand | |
assign-tmsi |
root@space:~/.osmocom# osmo-nitb -c ~/.osmocom/open-bsc.cfg -l ~/.osmocom/hlr.sqlite3 -P -C --debug=DRLL::CC::MM::RR::RSL::NM
<001e> socket.c:648 unable to bind socket:127.0.0.1:4242: Address already in use
<001e> socket.c:659 no suitable addr found for: 127.0.0.1:4242
<001e> telnet_interface.c:100 Cannot bind telnet at 127.0.0.1 4242
Reading config failed. Exiting.
<001e> socket.c:648 unable to bind socket:127.0.0.1:4242: Address already in use
<001e> socket.c:659 no suitable addr found for: 127.0.0.1:4242
<001e> telnet_interface.c:100 Cannot bind telnet at 127.0.0.1 4242
Reading config failed. Exiting.
Последнее редактирование: