Stunnel на Debian 10

[Mrvs]

Добрый вечер!
Очень нужна Ваша подсказка.
Поставил stunnel на debian10

но демон не запускается:
stunnel4.service - LSB: Start or stop stunnel 4.x (TLS tunnel for network daemons)
Loaded: loaded (/etc/init.d/stunnel4; generated)
Active: failed (Result: exit-code) since Sat 2020-05-23 16:43:18 BST; 6s ago
Docs: man:systemd-sysv-generator(8)
Process: 4026 ExecStart=/etc/init.d/stunnel4 start (code=exited, status=1/FAILURE)

May 23 16:43:18 debian stunnel4[4026]: [.] UTF-8 byte order mark not detected
May 23 16:43:18 debian stunnel4[4026]: [.] FIPS mode disabled
May 23 16:43:18 debian stunnel4[4026]: [!] No compression method is available
May 23 16:43:18 debian stunnel4[4026]: [!] Global options: Failed to initialize TLS
May 23 16:43:18 debian stunnel4[4026]: [ ] Deallocating section defaults
May 23 16:43:18 debian systemd[1]: stunnel4.service: Control process exited, code=exited, status=1/FAILURE
May 23 16:43:18 debian stunnel4[4026]: failed
May 23 16:43:18 debian stunnel4[4026]: You should check that you have specified the pid= in you configuration file
May 23 16:43:18 debian systemd[1]: stunnel4.service: Failed with result 'exit-code'.
May 23 16:43:18 debian systemd[1]: Failed to start LSB: Start or stop stunnel 4.x (TLS tunnel for network daemons).

Я так понял, проблема тут:
You should check that you have specified the pid= in you configuration file
Но в конфиге указан путь
pid = /var/run/stunnel4/stunnel.pid, права на соответствующую папку все есть
файл по факту не создаётся

Заранее спасибо

 

[z3r0c10wn]

Приложите выкладку с init.d скрипта