Добрый день, я вот уже который день учу материал по osmocom, и медленными но верными шагами продвигаюсь, инструкцию я использую отсюда
Запускаем GSM-сеть у себя дома
Остановился на моменте запуска базовой станции командой osmo-bts-trx --debug DRSL::OML::LAPDM -r 99, получаю ответ, ниже прикрепляю вывод и скрин терминала, по инструкции все шаги до выполнены без ошибок, так же прикрепляю вывод команды osmo-nitb -c ~/.osmocom/open-bsc.cfg -l ~/.osmocom/hlr.sqlite3 -P -C --debug=DRLL::CC::MM::RR:RSL::NM так как в ней так же появляется вывод с данными после запуска БС, файлы конфигурации я использую с официального сайта.
Не могу найти и понять где редактировать эти параметры, в osmo-bts.cfg и open-bsc.cfg эти параметры отсутствуют.
Кто поможет разобраться?
Запускаем GSM-сеть у себя дома
Остановился на моменте запуска базовой станции командой osmo-bts-trx --debug DRSL::OML::LAPDM -r 99, получаю ответ, ниже прикрепляю вывод и скрин терминала, по инструкции все шаги до выполнены без ошибок, так же прикрепляю вывод команды osmo-nitb -c ~/.osmocom/open-bsc.cfg -l ~/.osmocom/hlr.sqlite3 -P -C --debug=DRLL::CC::MM::RR:RSL::NM так как в ней так же появляется вывод с данными после запуска БС, файлы конфигурации я использую с официального сайта.
Не могу найти и понять где редактировать эти параметры, в osmo-bts.cfg и open-bsc.cfg эти параметры отсутствуют.
Кто поможет разобраться?
root@space:~/.osmocom# osmo-nitb -c ~/.osmocom/open-bsc.cfg -l ~/.osmocom/hlr.sqlite3 -P -C --debug=DRLL::CC::MM::RR::RSL::NM
<001e> telnet_interface.c:104 Available via telnet 127.0.0.1 4242
<0020> input/ipaccess.c:863 enabling ipaccess BSC mode on 0.0.0.0 with OML 3002 and RSL 3003 TCP ports
<0025> control_if.c:911 CTRL at 127.0.0.1 4249
DB: Database initialized.
DB: Database prepared.
<0020> input/ipa.c:287 0.0.0.0:3002 accept()ed new link from 127.0.0.1:38839
<0005> abis_nm.c:497 BTS0 Get Attributes Response: reported unexpectedly long (3 bytes) feature vector - most likely it was compiled against newer BSC headers. Consider upgrading your BSC to later version.
<0005> abis_nm.c:507 BTS0 feature 'EGPRS' reported via OML does not match statically set feature: 0 != 1. Please fix.
<0005> abis_nm.c:507 BTS0 feature 'OML Alerts' reported via OML does not match statically set feature: 1 != 0. Please fix.
<0005> abis_nm.c:507 BTS0 feature 'CBCH' reported via OML does not match statically set feature: 1 != 0. Please fix.
<0005> abis_nm.c:577 BTS0: failed to parse SW-Config part of Get Attribute Response Info: Invalid argument
<0005> abis_nm.c:468 BTS0 Attribute Manufacturer Dependent State is unreported
<0005> abis_nm.c:577 BTS0: failed to parse SW-Config part of Get Attribute Response Info: Invalid argument
<0005> abis_nm.c:2757 (bts=0,trx=0) IPA RSL CONNECT IP=0.0.0.0 PORT=3003 STREAM=0x00
<0020> input/ipa.c:287 0.0.0.0:3003 accept()ed new link from 127.0.0.1:43577
<0004> bsc_init.c:312 bootstrapping RSL for BTS/TRX (0/0) on ARFCN 3 using MCC-MNC 001-01 LAC=1 CID=0 BSIC=63
<0020> input/ipaccess.c:254 Sign link vanished, dead socket
<0020> input/ipaccess.c:74 Forcing socket shutdown with no signal link set
<0022> bsc_init.c:387 Lost some E1 TEI link: 1 0x8c33a98
<0022> bsc_init.c:387 Lost some E1 TEI link: 2 0x8c33a98
<001e> telnet_interface.c:104 Available via telnet 127.0.0.1 4242
<0020> input/ipaccess.c:863 enabling ipaccess BSC mode on 0.0.0.0 with OML 3002 and RSL 3003 TCP ports
<0025> control_if.c:911 CTRL at 127.0.0.1 4249
DB: Database initialized.
DB: Database prepared.
<0020> input/ipa.c:287 0.0.0.0:3002 accept()ed new link from 127.0.0.1:38839
<0005> abis_nm.c:497 BTS0 Get Attributes Response: reported unexpectedly long (3 bytes) feature vector - most likely it was compiled against newer BSC headers. Consider upgrading your BSC to later version.
<0005> abis_nm.c:507 BTS0 feature 'EGPRS' reported via OML does not match statically set feature: 0 != 1. Please fix.
<0005> abis_nm.c:507 BTS0 feature 'OML Alerts' reported via OML does not match statically set feature: 1 != 0. Please fix.
<0005> abis_nm.c:507 BTS0 feature 'CBCH' reported via OML does not match statically set feature: 1 != 0. Please fix.
<0005> abis_nm.c:577 BTS0: failed to parse SW-Config part of Get Attribute Response Info: Invalid argument
<0005> abis_nm.c:468 BTS0 Attribute Manufacturer Dependent State is unreported
<0005> abis_nm.c:577 BTS0: failed to parse SW-Config part of Get Attribute Response Info: Invalid argument
<0005> abis_nm.c:2757 (bts=0,trx=0) IPA RSL CONNECT IP=0.0.0.0 PORT=3003 STREAM=0x00
<0020> input/ipa.c:287 0.0.0.0:3003 accept()ed new link from 127.0.0.1:43577
<0004> bsc_init.c:312 bootstrapping RSL for BTS/TRX (0/0) on ARFCN 3 using MCC-MNC 001-01 LAC=1 CID=0 BSIC=63
<0020> input/ipaccess.c:254 Sign link vanished, dead socket
<0020> input/ipaccess.c:74 Forcing socket shutdown with no signal link set
<0022> bsc_init.c:387 Lost some E1 TEI link: 1 0x8c33a98
<0022> bsc_init.c:387 Lost some E1 TEI link: 2 0x8c33a98
~/.osmocom# osmo-bts-trx --debug DRSL::OML::LAPDM -r 99
((*))
|
/ \ OsmoBTS
<0001> oml.c:1462 Initializing OML attribute definitions
<0001> oml.c:220 (bts=0,trx=0): O&M Get Attributes [0], Manufacturer Dependent State is unsupported by TRX.
<0001> oml.c:641 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[0] (150 ms) as sent by BSC due to suspected LAPDm bug!
<0001> oml.c:641 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[1] (180 ms) as sent by BSC due to suspected LAPDm bug!
<0001> oml.c:641 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[2] (180 ms) as sent by BSC due to suspected LAPDm bug!
<0001> oml.c:641 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[3] (1680 ms) as sent by BSC due to suspected LAPDm bug!
<0001> oml.c:641 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[4] (520 ms) as sent by BSC due to suspected LAPDm bug!
<0001> oml.c:641 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[5] (165 ms) as sent by BSC due to suspected LAPDm bug!
<0001> oml.c:641 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[6] (1680 ms) as sent by BSC due to suspected LAPDm bug!
<0001> bts.c:292 Shutting down BTS 0, Reason TRX-CTRL-MSG: CRITICAL
Shutdown timer expired
((*))
|
/ \ OsmoBTS
<0001> oml.c:1462 Initializing OML attribute definitions
<0001> oml.c:220 (bts=0,trx=0): O&M Get Attributes [0], Manufacturer Dependent State is unsupported by TRX.
<0001> oml.c:641 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[0] (150 ms) as sent by BSC due to suspected LAPDm bug!
<0001> oml.c:641 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[1] (180 ms) as sent by BSC due to suspected LAPDm bug!
<0001> oml.c:641 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[2] (180 ms) as sent by BSC due to suspected LAPDm bug!
<0001> oml.c:641 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[3] (1680 ms) as sent by BSC due to suspected LAPDm bug!
<0001> oml.c:641 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[4] (520 ms) as sent by BSC due to suspected LAPDm bug!
<0001> oml.c:641 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[5] (165 ms) as sent by BSC due to suspected LAPDm bug!
<0001> oml.c:641 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[6] (1680 ms) as sent by BSC due to suspected LAPDm bug!
<0001> bts.c:292 Shutting down BTS 0, Reason TRX-CTRL-MSG: CRITICAL
Shutdown timer expired
Последнее редактирование:
