sudo fdisk /dev/mmcblk0
Command (m for help): p
Device Boot Start End Sectors Size Id Type
/dev/mmcblk0p1 1 125000 125000 61M c W95 FAT32 (LBA)
/dev/mmcblk0p2 125001 15523839 15398839 7.4G 83 LinuxCommand (m for help): d
Partition number (1,2, default 2): 2
Command (m for help): n
Select (default p): p
Partition number (2-4, default 2): 2
First sector (125001-31116287, default 126976): 125001
Last sector, +sectors or +size{K,M,G,T,P} (125001-31116287, default 31116287):
Do you want to remove the signature? [Y]es/[N]o: N
Command (m for help): wsudo resize2fs /dev/mmcblk0p2passwddeluser --remove-all-files picd /etc/ssh/
dpkg-reconfigure openssh-server
update-rc.d -f ssh remove
update-rc.d -f ssh defaults
service ssh restart
update-rc.d -f ssh enable 2 3 4 5apt purge tightvncserver -y && wget https://www.realvnc.com/download/file/vnc.files/VNC-Server-6.3.1-Linux-ARM.deb && sudo dpkg -i VNC-Server-6.3.1-Linux-ARM.deb && rm VNC-Server*vncserver :1 -geometry 1920x1080 -depth 24 -dpi 96
cd /usr/local/src && wget -O re4son-kernel_current.tar.xz https://re4son-kernel.com/download/re4son-kernel-current/&& tar -xJf re4son-kernel_current.tar.xz && rm -rf re4son-kernel_current.tar.xz && cd re4son-kernel_4.14.50-20180721 && ./install.shdpkg-reconfigure tzdata
vncserver -geometry 1920x1080 -depth 24 -dpi 96/usr/local/src/re4son-kernel_4.14.50-20180721/re4son-pi-tft-setup -a rootapt-get install xvkbd leafpad –ybluetoothctl
agent-on
default-agent
scan onpair XX:XX:XX:XX:XX:XXiw phy phy0 interface add mon0 type monitornano /etc/default/localeLANG="ru_RU.UTF-8"
LC_ALL="ru_RU.UTF-8"
Статья читается полностью. Тезисы со ссылками на разделы появятся позже.
Для Wi-Fi однозначно B+, вообще вопрос этот относится скорее к тому будут ли нормально работать другие железки с Kali из коробки. По сути про WAPT могу сказать что тоже подойдет в большинстве случаев.
А как часто вообще для подобных задач могут потребоваться гуи? Сложилось понимание, что гуи на таком железе сильно во вред, чем в пользу? Поправьте.
Да не так чтоб и часто, если есть знания, главное все предварительно настроить, у меня например автостарт ssh и VNC (GUI), для удаленного управления. Иногда может потребоваться GUI, в таких случаях поможет VNC, на B+ при нормальной связи с сетью GUI не тормозит, а если использовать напрямую через HDMI то не лагает вообще интерфейс xfce.
root@kali:~# sudo fdisk /dev/mmcblk0
Welcome to fdisk (util-linux 2.32).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p
Disk /dev/mmcblk0: 29.7 GiB, 31914983424 bytes, 62333952 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x1ff4ca32
Device Boot Start End Sectors Size Id Type
/dev/mmcblk0p1 1 125000 125000 61M c W95 FAT32 (LBA)
/dev/mmcblk0p2 125001 60619263 60494263 28.9G 83 Linux
Command (m for help): d
Partition number (1,2, default 2): 2
Partition 2 has been deleted.
Command (m for help): n
Partition type
p primary (1 primary, 0 extended, 3 free)
e extended (container for logical partitions)
Select (default p): p
Partition number (2-4, default 2): 2
First sector (125001-62333951, default 126976): 125001
Last sector, +sectors or +size{K,M,G,T,P} (125001-62333951, default 62333951):
Created a new partition 2 of type 'Linux' and of size 29.7 GiB.
Partition #2 contains a ext4 signature.
Do you want to remove the signature? [Y]es/[N]o: N
Command (m for help): w
The partition table has been altered.
Syncing disks.
root@kali:~# reboot
Linux kali 4.14.50-kali-v7+ #1 SMP Mon Jul 16 02:35:00 UTC 2018 armv7l
The programs included with the Kali GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Kali GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Oct 7 17:14:39 2018 from 192.168.8.196
root@kali:~# sudo resize2fs /dev/mmcblk0p2
resize2fs 1.44.3 (10-July-2018)
Filesystem at /dev/mmcblk0p2 is mounted on /; on-line resizing required
old_desc_blocks = 4, new_desc_blocks = 4
The filesystem on /dev/mmcblk0p2 is now 7776118 (4k) blocks long.
root@kali:~# deluser --remove-all-files pi
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
/usr/sbin/deluser: The user `pi' does not exist.
root@kali:~# cd /etc/ssh/
root@kali:/etc/ssh#
root@kali:/etc/ssh# dpkg-reconfigure openssh-server
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
rescue-ssh.target is a disabled or a static unit, not starting it.
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
root@kali:/etc/ssh# apt purge tightvncserver -y && wget https://www.realvnc.com/download/file/vnc.files/VNC-Server-6.3.1-Linux-ARM.deb && sudo dpkg -i VNC-Server-6.3.1-Linux-ARM.deb && rm VNC-Server*
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be REMOVED:
tightvncserver*
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
After this operation, 1160 kB disk space will be freed.
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
(Reading database ... 236437 files and directories currently installed.)
Removing tightvncserver (1:1.3.9-9) ...
Processing triggers for man-db (2.8.3-2) ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
--2018-10-07 17:18:53-- https://www.realvnc.com/download/file/vnc.files/VNC-Server-6.3.1-Linux-ARM.deb
Resolving www.realvnc.com (www.realvnc.com)... 13.33.166.220, 13.33.166.59, 13.33.166.88, ...
Connecting to www.realvnc.com (www.realvnc.com)|13.33.166.220|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 6091760 (5.8M) [application/x-debian-package]
Saving to: 'VNC-Server-6.3.1-Linux-ARM.deb'
VNC-Server-6.3.1-Linux-AR 100%[====================================>] 5.81M 26.6KB/s in 2m 56s
2018-10-07 17:21:50 (33.8 KB/s) - 'VNC-Server-6.3.1-Linux-ARM.deb' saved [6091760/6091760]
Selecting previously unselected package realvnc-vnc-server.
(Reading database ... 236417 files and directories currently installed.)
Preparing to unpack VNC-Server-6.3.1-Linux-ARM.deb ...
Unpacking realvnc-vnc-server (6.3.1.36657) ...
Setting up realvnc-vnc-server (6.3.1.36657) ...
Updating /etc/pam.d/vncserver
Updating /etc/pam.conf... done
Looking for font path... not found.
/usr/bin/vncserver-x11: error while loading shared libraries: libbcm_host.so: cannot open shared object file: No such file or directory
/usr/bin/vncserver-x11: error while loading shared libraries: libbcm_host.so: cannot open shared object file: No such file or directory
Installed systemd unit for VNC Server in Service Mode daemon
Start or stop the service with:
systemctl (start|stop) vncserver-x11-serviced.service
Mark or unmark the service to be started at boot time with:
systemctl (enable|disable) vncserver-x11-serviced.service
Installed systemd unit for VNC Server in Virtual Mode daemon
Start or stop the service with:
systemctl (start|stop) vncserver-virtuald.service
Mark or unmark the service to be started at boot time with:
systemctl (enable|disable) vncserver-virtuald.service
Processing triggers for desktop-file-utils (0.23-3) ...
Processing triggers for mime-support (3.61) ...
Processing triggers for shared-mime-info (1.9-2) ...
Processing triggers for man-db (2.8.3-2) ...
Processing triggers for hicolor-icon-theme (0.17-2) ...
root@kali:/etc/ssh# vncserver :1 -geometry 1920x1080 -depth 24 -dpi 96
vncserver: error while loading shared libraries: libbcm_host.so: cannot open shared object file: No such file or directory
root@kali:/etc/ssh# cd /usr/local/src && wget -O re4son-kernel_current.tar.xz https://re4son-kernel.com/download/re4son-kernel-current/&& tar -xJf re4son-kernel_current.tar.xz && rm -rf re4son-kernel_current.tar.xz && cd re4son-kernel_4.14.50-20180721 && ./install.sh
--2018-10-07 17:22:58-- https://re4son-kernel.com/download/re4son-kernel-current/
Resolving re4son-kernel.com (re4son-kernel.com)... 67.209.124.76
Connecting to re4son-kernel.com (re4son-kernel.com)|67.209.124.76|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 92080064 (88M) [application/octet-stream]
Saving to: 're4son-kernel_current.tar.xz'
re4son-kernel_current.tar 100%[====================================>] 87.81M 729KB/s in 2m 9s
2018-10-07 17:25:09 (697 KB/s) - 're4son-kernel_current.tar.xz' saved [92080064/92080064]
-bash: cd: re4son-kernel_4.14.50-20180721: No such file or directoryошибки могут быть при удалении пользователя pi, это нормально, перезагрузитесь и попробуйте
да нужен инет...+ Та же самая проблема.. Только благодаря вашему посту смог раскачегарить малину) Насколько я понимаю выхода два в сложившейся ситуации:После недавнего обновления замечены следующие проблемы:
- не грузит автоматом графоболочку, если Вам надо войти в графику - то на черном экране ctrl+alt+F3(4) - логинимся и startx
- долгая перезагрузка
- ssh стартует через 1.5-3 минуты после загрузки системы
- vnc валит, рекомендую заюзать team viewer - он надежнее в этом плане
- отваливается сеть - что провод, что вафля - но /etc/init.d/networking restart + service network-manager restart возвращают к жизни <--- надо быть подключеным к малине к примеру через монитор =\
по мелочи очень много косяков в этом обновлении.
Комментарии
99